TPS2300IPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Latched Fault, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~13V 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Depth | 4.5mm |
| Base Part Number | TPS2300 |
| Pin Count | 20 |
| Output Voltage | 21V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Nominal Supply Current | 200μA |
| Adjustable Threshold | YES |
| Current - Supply | 5μA |
| Output Current-Max | 500A |
| Supply Current-Max (Isup) | 1mA |
| Nominal Input Voltage | 13V |
| Internal Switch(s) | No |
| Programmable Features | Circuit Breaker, Fault Timeout, Slew Rate |
| Feature Pins | DISCH1, DISCH2, /ENABLE, /FAULT, ISET1, ISET2, PWRGD1, PWRGD2, TIMER, VREG |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2300IPWR Overview
This is included in the 20-TSSOP (0.173, 4.40mm Width) package.Currently, 2 channels can be accessed.Tape & Reel (TR)-shaped packaging is used for this product.Hot-swappable device terminates wHot-swappable deviceh 20 in total.Device DUAL is in the terminal position.20 pins make up its total.High efficiency is possible at a voltage of 4.5V.The way it's set up is the way Surface Mount wants it.Hot Swap Controller?is?the?classification?for?this?electrical?component.To ensure reliable operation, the temperature should be set to -40°C~85°C.A General Purpose application is available for the device.Hot-swappable device is featured in Latched Fault, UVLO.As long as you have a 3V~13V 3V~5.5VV power source, it should work.In the TPS2300 family, it appears as a number.During operation, 20 pins are used.Power Management Circuits contains this gadget on its own.Among its programmable features are Circuit Breaker, Fault Timeout, Slew Rate.There is currently an adequate supply of 5μA.Surface Mount is its direction of movement.Hot-swappable device is important that the supply voltage (Vsup) is kept above 3V for normal operation of the device.The maximum supply current for operation is 1mA.In the case of a 21V output voltage, high efficiency can be achieved.
TPS2300IPWR Features
The terminal position of 20
Features of Latched Fault, UVLO
Programmable features of Circuit Breaker, Fault Timeout, Slew Rate
Output voltage of 21V
TPS2300IPWR Applications
There are a lot of Texas Instruments TPS2300IPWR hot swap controllers applications.
- High power circuit board
- Circuit power protectors
- Industrial
- Current monitor output
- Microcontrollers
- Backplane
- DC boost circuit
- Redundant-array-of-independent-disk (RAID) storage
- Base station
- Current limit and current foldback limit functions
