TPS2301IPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Latched Fault, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.015W |
| Voltage - Supply | 3V~13V 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Depth | 4.5mm |
| Base Part Number | TPS2301 |
| Pin Count | 20 |
| Output Voltage | 21V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Operating Supply Current | 5μA |
| Adjustable Threshold | YES |
| Output Current-Max | 500A |
| Supply Current-Max (Isup) | 1mA |
| Nominal Input Voltage | 13V |
| Internal Switch(s) | No |
| Programmable Features | Circuit Breaker, Fault Timeout, Slew Rate |
| Feature Pins | DISCH1, DISCH2, ENABLE, /FAULT, ISET1, ISET2, PWRGD1, PWRGD2, TIMER, VREG |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2301IPW Overview
In the 20-TSSOP (0.173, 4.40mm Width) package you will find it.As of now, 2 channels are available.In the form of a Tube, it is packaged.This device has a total of 20 terminations.There is a DUAL terminal position on the device.Hot-swappable device has a total of 20 pins on Hot-swappable device.A supply voltage of 4.5V can result in high efficiency.In the way of Surface Mount, it's set up.Electrical components classified as Hot Swap Controller are referred to as Hot Swap Controller components.For reliable performance, the temperature should be set to -40°C~85°C.Application General Purpose is available on the device.Latched Fault, UVLO features it.In theory, it should work as long as the power source has a 3V~13V 3V~5.5VV input.There are numbers in the TPS2301 family that include it.20 pins are used to operate the system.This gadget is self-contained in?Power Management Circuits.There are Circuit Breaker, Fault Timeout, Slew Rate features that can be programmed.There is a Surface Mount axis pointing in the direction of the object.For normal operation, Vsup should be kept above 3V.The maximum operating current is 1mA.There is a supply current of 5μA.21V output voltage enables high efficiency.
TPS2301IPW Features
The terminal position of 20
Features of Latched Fault, UVLO
Programmable features of Circuit Breaker, Fault Timeout, Slew Rate
Output voltage of 21V
TPS2301IPW Applications
There are a lot of Texas Instruments TPS2301IPW hot swap controllers applications.
- DC boost circuit
- Overvoltage protection
- Current monitoring
- Raid
- Circuit breakers for electronic circuits
- Firewire
- Servers
- Storage network
- Telecom server
- CompactPCI
