TPS2310IPWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Latched Fault, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~13V 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Depth | 4.5mm |
| Base Part Number | TPS2310 |
| Pin Count | 20 |
| Output Voltage | 21V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Nominal Supply Current | 200μA |
| Adjustable Threshold | YES |
| Current - Supply | 500μA |
| Output Current-Max | 500A |
| Supply Current-Max (Isup) | 1mA |
| Nominal Input Voltage | 13V |
| Internal Switch(s) | No |
| Programmable Features | Circuit Breaker, Fault Timeout, Slew Rate |
| Feature Pins | ISET1, ISET2, PWRGD1, PWRGD2, TIMER, VREG |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2310IPWG4 Overview
Package 20-TSSOP (0.173, 4.40mm Width) includes it.Channel 2 is currently available.In the form of a Tube, it is packaged.The terminations total 20.In this case, the device is located at terminal DUAL.The device consists of a total of 20 pins.High efficiency is possible at a voltage of 4.5V.Surface Mount is set up this way.This electrical component is classified as Hot Swap Controller.To ensure reliable operation, the temperature should be set to -40°C~85°C.General Purpose applications can be downloaded from the device.The article is featured in Latched Fault, UVLO.Using a 3V~13V 3V~5.5VV power source should be able to power the device.The number TPS2310 belongs to the TPS2310 family.20 pins are used in operation.In Power Management Circuits, this gadget is self-contained.Hot-swappable device has Circuit Breaker, Fault Timeout, Slew Rate programmable features.There is currently an adequate supply of 500μA.There is a Surface Mount-axis orientation to it.For normal operation, Vsup should be kept above 3V.A maximum supply current of 1mA is required for the device to operate.High efficiency is feasible with a 21V output voltage.
TPS2310IPWG4 Features
The terminal position of 20
Features of Latched Fault, UVLO
Programmable features of Circuit Breaker, Fault Timeout, Slew Rate
Output voltage of 21V
TPS2310IPWG4 Applications
There are a lot of Texas Instruments TPS2310IPWG4 hot swap controllers applications.
- Power supply hotswap & inrush control
- Automatic restart after load failure
- Solid state circuit breakers
- Networking
- High power circuit board
- USB interface
- Servers
- Industrial high-side switches
- CompactPCI
- Industrial application
