TPS2320IPW
| Parameters | |
|---|---|
| Pin Count | 16 |
| Output Voltage | 21V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Operating Supply Current | 200μA |
| Adjustable Threshold | YES |
| Output Current-Max | 500A |
| Supply Current-Max (Isup) | 1mA |
| Nominal Input Voltage | 13V |
| Internal Switch(s) | No |
| Programmable Features | Circuit Breaker, Fault Timeout, Slew Rate |
| Feature Pins | DISCH1, DISCH2, /ENABLE, /FAULT, ISET1, ISET2, TIMER, VREG |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Latched Fault, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~13V 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Depth | 4.5mm |
| Base Part Number | TPS2320 |
TPS2320IPW Overview
There is a 16-TSSOP (0.173, 4.40mm Width) package that includes this.Currently, 2 channels can be accessed.Tube-shaped packaging is used for this product.There are a total of 16 terminations on it.There is a DUAL terminal position on the device.The device has a total of 16 pins.A supply voltage of 4.5V can result in high efficiency.Surface Mount sets it up.The electrical component in question falls into the classification Hot Swap Controller.The temperature should be set to -40°C~85°C to ensure reliable functioning.Apps for General Purpose are available on the device.There is a mention of it in Latched Fault, UVLO.If the power source is 3V~13V 3V~5.5VV, it should work fine.TPS2320 is a family of numbers.In order to operate, 16 pins are used.Despite its self-contained nature, Power Management Circuits is a very compact device.Its programmable features are Circuit Breaker, Fault Timeout, Slew Rate.Hot-swappable device is posHot-swappable deviceioned in the direction of Surface Mount.In order for a device to operate normally, the supply voltage (Vsup) must be higher than 3V.The maximum supply current it requires to operate is 1mA.Its operative supply current is 200μA.An output voltage of 21V is capable of delivering high efficiency.
TPS2320IPW Features
The terminal position of 16
Features of Latched Fault, UVLO
Programmable features of Circuit Breaker, Fault Timeout, Slew Rate
Output voltage of 21V
TPS2320IPW Applications
There are a lot of Texas Instruments TPS2320IPW hot swap controllers applications.
- Avionics systems
- Disconnect faulty loads before supply voltage drops
- Network switches
- Remote access server
- Overcurrent protection
- Raid
- Industrial computers and servers
- Redundant Array of Disks (RAID)
- Comprehensive analog and digital capabilities
- Circuit breakers for high-side circuits
