TPS2320IPWG4
| Parameters | |
|---|---|
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Latched Fault, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.015W |
| Voltage - Supply | 3V~13V 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Depth | 4.5mm |
| Base Part Number | TPS2320 |
| Pin Count | 16 |
| Output Voltage | 21V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Operating Supply Current | 5μA |
| Adjustable Threshold | YES |
| Output Current-Max | 500A |
| Supply Current-Max (Isup) | 1mA |
| Nominal Input Voltage | 13V |
| Internal Switch(s) | No |
| Programmable Features | Circuit Breaker, Fault Timeout, Slew Rate |
| Feature Pins | DISCH1, DISCH2, /ENABLE, /FAULT, ISET1, ISET2, TIMER, VREG |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
TPS2320IPWG4 Overview
You can find it in the 16-TSSOP (0.173, 4.40mm Width) package.Hot-swappable device is currently possible to access 2 channels.Tube-shaped packaging is used for this product.Hot-swappable device terminates wHot-swappable deviceh 16 in total.Its terminal position is DUAL.The device consists of a total of 16 pins.High efficiency can be achieved when the supply voltage is 4.5V.There is a Surface Mount-like arrangement.Hot Swap Controller?is?the?classification?for?this?electrical?component.If you want reliable performance, you should set the temperature to -40°C~85°C.The device has General Purpose applicationsA feature of Latched Fault, UVLO describes it.In theory, it should work as long as the power source has a 3V~13V 3V~5.5VV input.TPS2320 numbers belong to this family.16 pins are used to operate the system.This gadget is self-contained in?Power Management Circuits.Hot-swappable device has Circuit Breaker, Fault Timeout, Slew Rate programmable features.There is a Surface Mount-axis orientation to it.Hot-swappable device is important that the supply voltage (Vsup) is kept above 3V for normal operation of the device.During operation, it can supply a maximum current of 1mA.There is an operative supply current called 5μA.A 21V output voltage allows for high efficiency.
TPS2320IPWG4 Features
The terminal position of 16
Features of Latched Fault, UVLO
Programmable features of Circuit Breaker, Fault Timeout, Slew Rate
Output voltage of 21V
TPS2320IPWG4 Applications
There are a lot of Texas Instruments TPS2320IPWG4 hot swap controllers applications.
- Servers
- Limitting the inrush current
- Data communication systems
- Backplane
- Storage network
- Automotive circuits
- Current monitor output
- Hard drive
- Loads
- Overcurrent protection
