TPS2320IPWR
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~13V 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Depth | 4.5mm |
| Base Part Number | TPS2320 |
| Pin Count | 16 |
| Output Voltage | 21V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Nominal Supply Current | 200μA |
| Adjustable Threshold | YES |
| Current - Supply | 500μA |
| Output Current-Max | 500A |
| Supply Current-Max (Isup) | 1mA |
| Nominal Input Voltage | 13V |
| Internal Switch(s) | No |
| Programmable Features | Circuit Breaker, Fault Timeout, Slew Rate |
| Feature Pins | DISCH1, DISCH2, /ENABLE, /FAULT, ISET1, ISET2, TIMER, VREG |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Latched Fault, UVLO |
TPS2320IPWR Overview
In the 16-TSSOP (0.173, 4.40mm Width) package you will find it.At present, 2 channels are available.It's?packaged?in?the?form?of?a?Tape & Reel (TR).This device has a total of 16 terminations.There is a DUAL terminal position on the device.There are a total of 16 pins on it.A supply voltage of 4.5V can result in high efficiency.As Surface Mount would say, it's set up like that.In electrical components, Hot Swap Controller is the classification.A reliable operation requires the temperature to be set to -40°C~85°C.General Purpose applications can be downloaded from the device.The article appears in Latched Fault, UVLO.Hot-swappable device should work if you use a 3V~13V 3V~5.5VV power source.In the TPS2320 family, it appears as a number.16 pins are used to operate the system.Despite its self-contained nature, Power Management Circuits is a very compact device.Circuit Breaker, Fault Timeout, Slew Rate is the number of features it can be programmed with.The current supply of 500μA.As you can see, it is positioned in the direction of Surface Mount.Hot-swappable device is important that the supply voltage (Vsup) is kept above 3V for normal operation of the device.During operation, it can supply a maximum current of 1mA.There is no problem with a 21V output voltage if you want high efficiency.
TPS2320IPWR Features
The terminal position of 16
Features of Latched Fault, UVLO
Programmable features of Circuit Breaker, Fault Timeout, Slew Rate
Output voltage of 21V
TPS2320IPWR Applications
There are a lot of Texas Instruments TPS2320IPWR hot swap controllers applications.
- Supply voltage monitoring
- Redundant negative voltage supplies
- Industrial computers and servers
- Reverse current protection
- Microcontrollers
- Networking
- Automotive circuits
- Industrial
- Servers
- Server backplane system
