TPS2330IDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Latched Fault, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Additional Feature | REQUIRES 3V TO 5.5V SUPPLY FOR CHANNEL 2 |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~13V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Depth | 4mm |
| Base Part Number | TPS2330 |
| Pin Count | 14 |
| Output Voltage | 21V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Adjustable Threshold | YES |
| Current - Supply | 500μA |
| Output Current-Max | 500A |
| Nominal Input Voltage | 13V |
| Internal Switch(s) | No |
| Programmable Features | Circuit Breaker, Fault Timeout, Slew Rate |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2330IDRG4 Overview
You get it with the 14-SOIC (0.154, 3.90mm Width) package.Currently, 1 channels can be accessed.Tape & Reel (TR)-shaped packaging is used for this product.Hot-swappable device terminates wHot-swappable deviceh 14 in total.In this case, the device is located at terminal DUAL.The device has a total of 14 pins.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 4.5V.In the way of Surface Mount, it's set up.In the electrical industry, this component is categoriHot Swap Controllered as Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~85°C.Devices with General Purpose applications are available.In Latched Fault, UVLO, it is featured.Using a 3V~13VV power source should be able to power the device.This number is a member of the TPS2330 family.Operating the device requires 14 pins.As far as Power Management Circuits is concerned, this gadget is self-contained.Among its programmable features are Circuit Breaker, Fault Timeout, Slew Rate.Hot-swappable device is estimated that there is a current supply of 500μA.Positioned in direction of Surface Mount, it is at a right angle.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 3V in order to maintain normal operation.The maximum current required for its operation is {0}.The same device can also be used to produce REQUIRES 3V TO 5.5V SUPPLY FOR CHANNEL 2.21V output voltages are capable of high efficiency.
TPS2330IDRG4 Features
The terminal position of 14
Features of Latched Fault, UVLO
Programmable features of Circuit Breaker, Fault Timeout, Slew Rate
Output voltage of 21V
TPS2330IDRG4 Applications
There are a lot of Texas Instruments TPS2330IDRG4 hot swap controllers applications.
- Microcontrollers
- Power supply hotswap & inrush control
- Electric vehicle
- Short circuit protection
- Load transient protection
- Modern analog communication
- Overcurrent protection
- Board or blade insertion into live backplanes
- Limitting the inrush current
- Automatic restart after load failure
