banner_page

TPS2330IPW

Tube Active 1 Surface Mount Hot Swap Controllers Latched Fault, UVLO 14-TSSOP (0.173, 4.40mm Width) 1 General Purpose Hot Swap Controller


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2330IPW
  • Package: 14-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 955
  • Description: Tube Active 1 Surface Mount Hot Swap Controllers Latched Fault, UVLO 14-TSSOP (0.173, 4.40mm Width) 1 General Purpose Hot Swap Controller (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173, 4.40mm Width)
Number of Pins 14
Weight 57.209338mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Feature Latched Fault, UVLO
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Type Hot Swap Controller
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Applications General Purpose
Additional Feature REQUIRES 3V TO 5.5V SUPPLY FOR CHANNEL 2
Subcategory Power Management Circuits
Max Power Dissipation 755mW
Voltage - Supply 3V~13V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 4.5V
Depth 4.5mm
Base Part Number TPS2330
Pin Count 14
Output Voltage 21V
Supply Voltage-Min (Vsup) 3V
Number of Channels 1
Operating Supply Current 5μA
Max Supply Current 1mA
Adjustable Threshold YES
Output Current-Max 500A
Nominal Input Voltage 13V
Internal Switch(s) No
Programmable Features Circuit Breaker, Fault Timeout, Slew Rate
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2330IPW Overview


There is a 14-TSSOP (0.173, 4.40mm Width) package that includes this.At the moment, there are 1 channels available.Tube-shaped packaging is used for this product.The 14 terminations total to three.In this case, the device is located at terminal DUAL.14 pins make up the entire device.A supply voltage of 4.5V allows for high efficiency.This is set up in the same way as Surface Mount.In electrical components, Hot Swap Controller is the classification.To ensure reliable operation, set the temperature to -40°C~85°C.General Purpose applications can be downloaded from the device.Latched Fault, UVLO features it.Hot-swappable device should be able to work wHot-swappable deviceh a 3V~13VV power source.Hot-swappable device belongs to the TPS2330 family of numbers.For operation, 14 pins are used.As far as Power Management Circuits is concerned, this gadget is self-contained.There are Circuit Breaker, Fault Timeout, Slew Rate features that can be programmed.Surface Mount is the direction in which it is positioned.Normally, Vsup should remain above 3V.5μA is the operative supply current.There is a maximum current requirement of 1mA for it to operate.The same device can also be used to produce REQUIRES 3V TO 5.5V SUPPLY FOR CHANNEL 2.A 21V output voltage allows for high efficiency.

TPS2330IPW Features


The terminal position of 14
Features of Latched Fault, UVLO
Programmable features of Circuit Breaker, Fault Timeout, Slew Rate
Output voltage of 21V

TPS2330IPW Applications


There are a lot of Texas Instruments TPS2330IPW hot swap controllers applications.

  • Power monitoring
  • Limitting the inrush current
  • Firewire
  • Identify faulty boards
  • Redundant Array of Disks (RAID)
  • Automatic restart after load failure
  • Inrush current control
  • Telecom server
  • Circuit power protectors
  • Redundant-array-of-independent-disk (RAID) storage

Write a review

Note: HTML is not translated!
    Bad           Good