banner_page

TPS2330IPWG4

Tube Active 1 Surface Mount Hot Swap Controllers 500μA mA Latched Fault, UVLO 14-TSSOP (0.173, 4.40mm Width) 1 General Purpose Hot Swap Controller


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2330IPWG4
  • Package: 14-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 521
  • Description: Tube Active 1 Surface Mount Hot Swap Controllers 500μA mA Latched Fault, UVLO 14-TSSOP (0.173, 4.40mm Width) 1 General Purpose Hot Swap Controller (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173, 4.40mm Width)
Number of Pins 14
Weight 57.209338mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Feature Latched Fault, UVLO
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Type Hot Swap Controller
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Applications General Purpose
Additional Feature REQUIRES 3V TO 5.5V SUPPLY FOR CHANNEL 2
Subcategory Power Management Circuits
Voltage - Supply 3V~13V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 4.5V
Depth 4.5mm
Base Part Number TPS2330
Pin Count 14
Output Voltage 21V
Supply Voltage-Min (Vsup) 3V
Number of Channels 1
Nominal Supply Current 1mA
Max Supply Current 1mA
Adjustable Threshold YES
Current - Supply 500μA
Output Current-Max 500A
Nominal Input Voltage 13V
Internal Switch(s) No
Programmable Features Circuit Breaker, Fault Timeout, Slew Rate
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2330IPWG4 Overview


As part of the 14-TSSOP (0.173, 4.40mm Width) package, it is included.Currently, there are 1 channels accessible.A Tube-shaped package holds it.Total terminations are 14.Device DUAL is located at the terminal position.The device has a total of 14 pins.A supply voltage of 4.5V allows for high efficiency.In the way of Surface Mount, it's set up.Electrical components classified as Hot Swap Controller are referred to as Hot Swap Controller components.To ensure reliable operation, set the temperature to -40°C~85°C.Devices with General Purpose applications are available.Latched Fault, UVLO features it.As long as you have a 3V~13VV power source, it should work.The number TPS2330 belongs to the TPS2330 family.14 pins are used in operation.Power Management Circuits contains this gadget all by itself.There are Circuit Breaker, Fault Timeout, Slew Rate programmable features on this device.500μA is currently in short supply.Positioned in direction of Surface Mount, it is at a right angle.For normal operation, Vsup should be kept above 3V.During operation, it will require a maximum current of 1mA.By using this device, it is also possible to produce REQUIRES 3V TO 5.5V SUPPLY FOR CHANNEL 2.There is no problem with a 21V output voltage if you want high efficiency.

TPS2330IPWG4 Features


The terminal position of 14
Features of Latched Fault, UVLO
Programmable features of Circuit Breaker, Fault Timeout, Slew Rate
Output voltage of 21V

TPS2330IPWG4 Applications


There are a lot of Texas Instruments TPS2330IPWG4 hot swap controllers applications.

  • Overvoltage protection
  • Redundant Array of Disks (RAID)
  • Power supply hotswap & inrush control
  • Remote access server
  • High power circuit board
  • Other forms of communications infrastructure
  • Telecommunications
  • Limitting the inrush current
  • Modern analog communication
  • Industrial

Write a review

Note: HTML is not translated!
    Bad           Good