TPS2330IPWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Latched Fault, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Additional Feature | REQUIRES 3V TO 5.5V SUPPLY FOR CHANNEL 2 |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~13V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Depth | 4.5mm |
| Base Part Number | TPS2330 |
| Pin Count | 14 |
| Output Voltage | 21V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Adjustable Threshold | YES |
| Current - Supply | 500μA |
| Output Current-Max | 500A |
| Nominal Input Voltage | 13V |
| Internal Switch(s) | No |
| Programmable Features | Circuit Breaker, Fault Timeout, Slew Rate |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2330IPWRG4 Overview
You get it with the 14-TSSOP (0.173, 4.40mm Width) package.At the moment, 1 channels are accessible.Tape & Reel (TR)-shaped packaging is used.Hot-swappable device terminates wHot-swappable deviceh 14 in total.Device position DUAL is its terminal position.There are a total of 14 pins on it.A supply voltage of 4.5V allows for high efficiency.Surface Mount is set up this way.The electrical component in question falls into the classification Hot Swap Controller.To ensure reliable operation, set the temperature to -40°C~85°C.Apps for General Purpose are available on the device.Hot-swappable device is featured in Latched Fault, UVLO.In the case of a 3V~13VV power source, it should work just fine.In the TPS2330 family, it appears as a number.14 pins are used in operation.The gadget in Power Management Circuits is self-contained.There are Circuit Breaker, Fault Timeout, Slew Rate features that can be programmed.This is the current supply of 500μA.Hot-swappable device is posHot-swappable deviceioned in the direction of Surface Mount.For normal operation, the supply voltage (Vsup) should be kept above 3V in order to maintain a constant level of power.In order to operate it, 1mA is the maximum current needed.Through the use of this device, REQUIRES 3V TO 5.5V SUPPLY FOR CHANNEL 2 can also be produced.21V output voltage enables high efficiency.
TPS2330IPWRG4 Features
The terminal position of 14
Features of Latched Fault, UVLO
Programmable features of Circuit Breaker, Fault Timeout, Slew Rate
Output voltage of 21V
TPS2330IPWRG4 Applications
There are a lot of Texas Instruments TPS2330IPWRG4 hot swap controllers applications.
- Power supply hotswap & inrush control
- DC boost circuit
- Network switches
- Undervoltage protection
- Microcontrollers
- Telecommunications
- Current limit and current foldback limit functions
- Active current limit
- Short-circuit protection in real time
- Industrial
