TPS2350D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Auto Retry |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Applications | -48V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 750mW |
| Voltage - Supply | -80V~-12V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Depth | 4mm |
| Base Part Number | TPS2350 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Voltage | 80V |
| Power Supplies | -48V |
| Number of Channels | 3 |
| Operating Supply Current | 2mA |
| Max Supply Current | 2mA |
| Adjustable Threshold | YES |
| Min Input Voltage | -80V |
| Output Current-Max | 500A |
| Max Input Voltage | -12V |
| Neg Supply Voltage-Nom (Vsup) | -48V |
| Nominal Input Voltage | -12V |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, OVP, Slew Rate, UVLO |
| Feature Pins | /FLT, FLTTIM, OV, PG, RAMP, UV |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2350D Overview
In the 14-SOIC (0.154, 3.90mm Width) package you will find it.In the current state, 3 channels are accessible.It's packaged in a Tube shape.In total, it has 14 terminations.A device's terminal position is DUAL.Hot-swappable device has a total of 14 pins on Hot-swappable device.The way it's set up is the way Surface Mount wants it.Electrical components classified as Hot Swap Controller are referred to as Hot Swap Controller components.Ensure reliable operation by setting the temperature to -40°C~85°C.Apps for -48V are available on the device.There is a reference to it in Auto Retry.The device should be able to be powered by a -80V~-12VV power source.In the TPS2350 family, it appears as a number.Hot-swappable device is necessary to use 14 pins in order to operate the device.Power Management Circuits contains this gadget all by itself.Current Limit, Fault Timeout, OVP, Slew Rate, UVLO is its programmable feature.The power supply of the part is referred to as -48V.By default, it is set to output 1.There is an operative supply current called 2mA.Its maximum current requirement is 2mA.Hot Swap is possible to achieve high efficiency wHot Swaph a 80V output voltage.
TPS2350D Features
The terminal position of 14
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
Output voltage of 80V
TPS2350D Applications
There are a lot of Texas Instruments TPS2350D hot swap controllers applications.
- Redundant Array of Disks (RAID)
- Inrush current control
- Backplane
- Data communication systems
- Network router
- Automotive circuits
- Electric vehicle
- Short circuit protection
- Overvoltage protection
- Thermal limitation
