TPS2350DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto Retry |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | -48V |
| Subcategory | Power Management Circuits |
| Voltage - Supply | -80V~-12V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Depth | 4mm |
| Base Part Number | TPS2350 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Voltage | 80V |
| Power Supplies | -48V |
| Number of Channels | 3 |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2mA |
| Adjustable Threshold | YES |
| Min Input Voltage | -80V |
| Output Current-Max | 500A |
| Max Input Voltage | -12V |
| Neg Supply Voltage-Nom (Vsup) | -48V |
| Nominal Input Voltage | -12V |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, OVP, Slew Rate, UVLO |
| Feature Pins | /FLT, FLTTIM, OV, PG, RAMP, UV |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2350DR Overview
It's included in the 14-SOIC (0.154, 3.90mm Width) package.Hot-swappable device is currently possible to access 3 channels.Tape & Reel (TR)-shaped packaging is used for this product.This device has a total of 14 terminations.The terminal position of the device is DUAL.14 pins make up the entire device.As Surface Mount would say, it's set up like that.Hot Swap Controller?is?the?classification?for?this?electrical?component.For reliable operation, set the temperature to -40°C~85°C.Hot-swappable device has -48V applications.There is a mention of it in Auto Retry.Hot-swappable device should be able to work wHot-swappable deviceh a -80V~-12VV power source.The TPS2350 family includes it.Hot-swappable device is necessary to use 14 pins in order to operate the device.Despite its self-contained nature, Power Management Circuits is a very compact device.Its programmable features are Current Limit, Fault Timeout, OVP, Slew Rate, UVLO.The power supplies of the part is -48V.The default setting is output 1.Hot Swap requires a maximum current of 2mA to operate.An output voltage of 80V is capable of delivering high efficiency.
TPS2350DR Features
The terminal position of 14
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
Output voltage of 80V
TPS2350DR Applications
There are a lot of Texas Instruments TPS2350DR hot swap controllers applications.
- Network switches
- Base station power distribution system
- Current monitor output
- Inrush current control
- Disconnect faulty loads before supply voltage drops
- Load transient protection
- Industrial high-side switches
- PC board hot swap insertion and removal
- High power circuit board
- Industrial application
