TPS2350PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto Retry |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | -48V |
| Subcategory | Power Management Circuits |
| Voltage - Supply | -80V~-12V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Depth | 4.4mm |
| Base Part Number | TPS2350 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Voltage | 80V |
| Power Supplies | -48V |
| Number of Channels | 3 |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2mA |
| Adjustable Threshold | YES |
| Min Input Voltage | -80V |
| Output Current-Max | 500A |
| Max Input Voltage | -12V |
| Neg Supply Voltage-Nom (Vsup) | -48V |
| Nominal Input Voltage | -12V |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, OVP, Slew Rate, UVLO |
| Feature Pins | /FLT, FLTTIM, OV, PG, RAMP, UV |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2350PWRG4 Overview
You can find it in the 14-TSSOP (0.173, 4.40mm Width) package.At present, 3 channels are available.A Tape & Reel (TR)-shaped package holds it.Total terminations are 14.In this case, the device is located at terminal DUAL.The device consists of a total of 14 pins.The way it's set up is the way Surface Mount wants it.The electrical component in question falls into the classification Hot Swap Controller.For reliable performance, the temperature should be set to -40°C~85°C.There are -48V applications on the device.There is a mention of it in Auto Retry.With a -80V~-12VV power source, it should work.Hot-swappable device belongs to the TPS2350 family of numbers.Hot-swappable device is necessary to use 14 pins in order to operate the device.Power Management Circuits contains this gadget on its own.There are Current Limit, Fault Timeout, OVP, Slew Rate, UVLO features that can be programmed.Hot-swappable device is important to note that the part has a power supply -48V.Hot Swap is set by default to output 1.2mA is the maximum current required for its operation.In the case of a 80V output voltage, high efficiency can be achieved.
TPS2350PWRG4 Features
The terminal position of 14
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
Output voltage of 80V
TPS2350PWRG4 Applications
There are a lot of Texas Instruments TPS2350PWRG4 hot swap controllers applications.
- Hard drive
- Raid
- Remote access server
- Circuit breakers for high-side circuits
- Servers
- Power supply hotswap & inrush control
- Redundant-array-of-independent-disk (RAID) storage
- Microcontrollers
- Datacom
- CompactPCI
