TPS2358RGZR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Weight | 138.005479mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Latched Fault, Thermal Limit, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, OR Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | ATCA, MicroTCA™ |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 3V~4V 8.5V~15V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2358 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 4V |
| Power Supplies | 3.312V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Operating Supply Current | 3.1mA |
| Current - Output (Max) | 165mA |
| Nominal Supply Current | 3.1mA |
| Adjustable Threshold | NO |
| Threshold Voltage | +10.8 |
| Internal Switch(s) | Both |
| Programmable Features | Current Limit, Fault Timeout, Slew Rate |
| Height | 1mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2358RGZR Overview
The 48-VFQFN Exposed Pad package includes it.4 channels are currently available.The package looks like a Tape & Reel (TR).There are a total of 48 terminations on it.Its terminal position is QUAD.Total number of pins is 48.High efficiency is possible at a voltage of 3.3V.As Surface Mount would say, it's set up like that.Electric components of this type are classified as Hot Swap Controller, OR Controller.To ensure reliable operation, the temperature should be set to -40°C~85°C.Devices with ATCA, MicroTCA? applications are available.As you can see in Latched Fault, Thermal Limit, UVLO, it's featured.With a 3V~4V 8.5V~15VV power source, it should work.Hot-swappable device belongs to the TPS2358 family of numbers.Operating the device requires 48 pins.This gadget is self-contained in?Power Management Circuits.There are Current Limit, Fault Timeout, Slew Rate programmable features on this device.Hot-swappable device is posHot-swappable deviceioned in the direction of Surface Mount.In order for a device to operate normally, the supply voltage (Vsup) must be higher than 3V.4V is set for Vsup (maximum supply voltage).The power supplies of the part is 3.312V.Device output is 165mAV at its maximum.Its operative supply current is 3.1mA.
TPS2358RGZR Features
The terminal position of 48
Features of Latched Fault, Thermal Limit, UVLO
Programmable features of Current Limit, Fault Timeout, Slew Rate
TPS2358RGZR Applications
There are a lot of Texas Instruments TPS2358RGZR hot swap controllers applications.
- High power circuit board
- Avionics systems
- Temperature monitor output
- Servers
- Automotive circuits
- Identify faulty boards
- Industrial high-side switches
- Backplane
- Base station power distribution system
- Redundant-array-of-independent-disk (RAID) storage
