TPS2358RGZT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Weight | 138.005479mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Latched Fault, Thermal Limit, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, OR Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | ATCA, MicroTCA™ |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 3V~4V 8.5V~15V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2358 |
| Pin Count | 48 |
| Max Output Current | 165mA |
| Supply Voltage-Max (Vsup) | 4V |
| Power Supplies | 3.312V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Operating Supply Current | 3.1mA |
| Output Current | 165mA |
| Adjustable Threshold | NO |
| Max Input Voltage | 15V |
| Nominal Input Voltage | 8.5V |
| Threshold Voltage | +10.8 |
| Internal Switch(s) | Both |
| Programmable Features | Current Limit, Fault Timeout, Slew Rate |
| Height | 1mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2358RGZT Overview
You can find it in the 48-VFQFN Exposed Pad package.At the moment, there are 4 channels available.Tape & Reel (TR)-shaped packaging is used.There are 48 terminations in total.A device's terminal position is QUAD.48 pins make up the entire device.High efficiency can be achieved when the supply voltage is 3.3V.As Surface Mount would say, it's set up like that.In electrical components, Hot Swap Controller, OR Controller is the classification.A temperature setting of -40°C~85°C will ensure reliable operation.There are ATCA, MicroTCA? applications on the device.A feature of Latched Fault, Thermal Limit, UVLO describes it.With a 3V~4V 8.5V~15VV power source, it should work.TPS2358 is a family of numbers.Operating the device requires 48 pins.Power Management Circuits contains this gadget all by itself.Current Limit, Fault Timeout, Slew Rate features are programmable.Hot-swappable device is posHot-swappable deviceioned in the direction of Surface Mount.For normal operation, Vsup should be kept above 3V.Hot-swappable device is set to 4V for the maximum supply voltage.Hot-swappable device has a 3.312V power supply, which is the power supply used in the part.Supply current 3.1mA is operative.Consequently, 165mA is the maximum output current that can be achieved to meet the operation criteria.
TPS2358RGZT Features
The terminal position of 48
Features of Latched Fault, Thermal Limit, UVLO
Programmable features of Current Limit, Fault Timeout, Slew Rate
TPS2358RGZT Applications
There are a lot of Texas Instruments TPS2358RGZT hot swap controllers applications.
- Limitting the inrush current
- Short-circuit protection in real time
- Modern analog communication
- PC board hot swap insertion and removal
- Temperature monitor output
- Network router
- Redundant negative voltage supplies
- Avionics systems
- Load transient protection
- Backplane
