TPS2359RHHT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-VFQFN Exposed Pad |
| Number of Pins | 36 |
| Weight | 105.687022mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | I2C, Thermal Limit, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, OR Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | ATCA, MicroTCA™ |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~4V 8.5V~15V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2359 |
| Pin Count | 36 |
| Max Output Current | 165mA |
| Supply Voltage-Max (Vsup) | 4V |
| Power Supplies | 3.312V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Operating Supply Current | 3.1mA |
| Output Current | 165mA |
| Adjustable Threshold | YES |
| Max Input Voltage | 15V |
| Threshold Voltage | +10.8 |
| Internal Switch(s) | Both |
| Programmable Features | Auto Retry, Current Limit, Fault Timeout, Latched Fault, Slew Rate |
| Feature Pins | EN3X, /IRPT, SETX, SUMX |
| Height | 1mm |
| Length | 6mm |
| Width | 6mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2359RHHT Overview
You can find it in the 36-VFQFN Exposed Pad package.In the current state, 4 channels are accessible.There is a Tape & Reel (TR)-shaped package for it.Total terminations are 36.A device's terminal position is QUAD.Total number of pins is 36.A supply voltage of 3.3V can result in high efficiency.The way it's set up is the way Surface Mount wants it.An electrical component classified as Hot Swap Controller, OR Controller belongs to this category.Hot-swappable device is recommended that the temperature is set to -40°C~85°C in order to ensure reliable performance.ATCA, MicroTCA? applications can be downloaded from the device.There is a mention of it in I2C, Thermal Limit, UVLO.Hot-swappable device should work if you use a 3V~4V 8.5V~15VV power source.TPS2359 numbers belong to this family.During operation, 36 pins are used.Power Management Circuits contains this gadget all by itself.Auto Retry, Current Limit, Fault Timeout, Latched Fault, Slew Rate features are programmable.Positioned in direction of Surface Mount, it is at a right angle.For normal operation, Vsup should be kept above 3V.4V is set for Vsup (maximum supply voltage).Hot-swappable device is 3.312V type power supplies that are used in this part.There is a supply current of 3.1mA.Hot Swap is necessary to reduce the maximum output current to 165mA in order to meet the operation crHot Swaperia.
TPS2359RHHT Features
The terminal position of 36
Features of I2C, Thermal Limit, UVLO
Programmable features of Auto Retry, Current Limit, Fault Timeout, Latched Fault, Slew Rate
TPS2359RHHT Applications
There are a lot of Texas Instruments TPS2359RHHT hot swap controllers applications.
- Power supply hotswap & inrush control
- Power monitoring
- Base station
- Microcontrollers
- Short circuit protection
- Load transient protection
- Other forms of communications infrastructure
- High power circuit board
- Firewire
- ISDN system
