TPS23753APW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 140.30179mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Controller (PD), DC/DC |
| Resistance | 1.2Ohm |
| Subcategory | Switching Regulator or Controllers |
| Voltage - Supply | 0V~57V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Frequency | 248kHz |
| Base Part Number | TPS23753 |
| Pin Count | 14 |
| Operating Supply Voltage | 57V |
| Input Voltage-Nom | 48V |
| Number of Channels | 1 |
| Operating Supply Current | 580μA |
| Output Power | 13W |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.85mA |
| Nominal Input Voltage | 57V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Both |
| Min Current Limit | 405mA |
| Max Duty Cycle | 78 % |
| Standards | 802.3at (PoE+), 802.3af (PoE) |
| Auxiliary Sense | No |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS23753APW Overview
There is an embedded version of it in the Tube package.There is a way in which it is packaged which is referred to as 14-TSSOP (0.173, 4.40mm Width).Controller (PD), DC/DC is the type of PoE controller.Channel number is growing strong/weak: 1.For a reliable operation, -40°C~125°C is the PoE operating temperature.There is a voltage of 0V~57V that is used for the supply voltage of this electrical Po E controller.It is possible to identify its Po E controllers based on its base part number TPS23753.An 14 termination involves terminating a transmission line with a power over ethernet controller with a characteristic impedance that matches the line's characteristics.It is equipped with 14 pin count.There is a Po E controller like this in Switching Regulator or Controllers.A 14-pin design is used in it.There is a peak reflow temperature of this electric ethernet power controller (Cel) of 260 degrees Celsius.The supply voltage should be greater than 48V.During its operation, Isup reaches 0.85mA, the maximum current.As a requirement for 580μA to function properly, it must be supplied with a current.There is a 248kHz frequency associated with this electrical PoE ethernet controller.The operating supply voltage of this PoE controller is 57V.In this case, 1.2Ohm (*) is the value of its resistance.There is a power output of 13W for this ethernet over power controller.
TPS23753APW Features
Tube package
14 pin count
14 pins
1.2Ohm (Ω)
TPS23753APW Applications
There are a lot of Texas Instruments TPS23753APW Power Over Ethernet (PoE) Controllers applications.
- Internet Appliances
- Midspan Applications
- Public Information Displays
- VoIP Phones
- Switches
- IEEE 802.3bt (Draft) Compliant Devices
- Wireless Access Points
- Security Cameras
- High Power Wireless Data Systems
- Pass-through System
