TPS23756PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 81.788374mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Controller (PD), DC/DC |
| Resistance | 750mOhm |
| Subcategory | Switching Regulator or Controllers |
| Voltage - Supply | 0V~57V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 278kHz |
| Base Part Number | TPS23756 |
| Pin Count | 20 |
| Output Voltage | 14.3V |
| Operating Supply Voltage | 57V |
| Input Voltage-Nom | 10.2V |
| Number of Channels | 1 |
| Operating Supply Current | 920μA |
| Output Current | 1A |
| Power - Max | 30W |
| Max Output Voltage | 15.7V |
| Min Input Voltage | 0V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 57V |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 57V |
| Min Output Voltage | 14.3V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Both |
| Min Current Limit | 850mA |
| Standards | 802.3at (PoE+), 802.3af (PoE) |
| Switching Frequency | 253kHz |
| Auxiliary Sense | No |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS23756PWP Overview
The package Tube includes it as part of PoE controller.In this case, it is packaged in the same way as 20-PowerTSSOP (0.173, 4.40mm Width).PoE controllers of this type are called Controller (PD), DC/DC.There is a strong/weak growth in the number of channels: 1.In order to maintain reliability, PoE operates at a temperature of -40°C~125°C.Electricity is supplied to this Po E controller by voltage 0V~57V.A base part number TPS23756 can be used to identify its Po E controllers according to that number.20 termination is achieved by terminating a transmission line with an impedance match power over ethernet controller.There is a maximum power of 30W Watts that can be generated by this electrical ethernet over power controller.In addition, it comes with a 20 pin count.A Po E controller like this is included in Switching Regulator or Controllers.A 20-pin design is used in it.In the case of this electrical ethernet power controller, the peak reflow temperature (Cel) is 260 degrees Celsius.In order for 920μA to perform its proper functions, it needs to have a current supply that is adequate.In this electrical PoE ethernet controller, the frequency is 278kHz.A key feature of 1A is its output current, which provides maximum design flexibility.In this PoE controller, 57V is the operating supply voltage.Resistance is?a measure of the opposition to current flow in an electrical circuit.?The resistance of this PoE controller is 750mOhm (Ω). This power over ethernet controller outputs 14.3V voltage.In this power over ethernet PoE controller, 57V is the maximal input voltage that it can accept.This power over the ethernet controller's minimal input voltage is 0V.
TPS23756PWP Features
Tube package
20 pin count
20 pins
The output current of 1A
750mOhm (Ω)
TPS23756PWP Applications
There are a lot of Texas Instruments TPS23756PWP Power Over Ethernet (PoE) Controllers applications.
- Single-Port PSE Power Injectors
- Dual Signature PD/Forced UPOE
- IP Phone Power Management
- VoIP Phones
- Industrial Automation Equipment
- Outdoor Security Camera Equipment
- Internet Appliances
- IEEE 802.3af Compliant PoE Powered Devices
- Commercial Information Displays
- Single-Port PSE End-Point Applications
