TPS23757PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Controller (PD), DC/DC |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Voltage - Supply | 0V~57V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS23757 |
| Pin Count | 20 |
| Input Voltage-Nom | 10.2V |
| Number of Channels | 1 |
| Power Dissipation | 13W |
| Current - Supply | 920μA |
| Input Voltage (Min) | 5.8V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.535A |
| Input Voltage (Max) | 57V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 278kHz |
| Internal Switch(s) | Both |
| Min Current Limit | 400mA |
| Standards | 802.3at (PoE+), 802.3af (PoE) |
| Auxiliary Sense | No |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS23757PWR Overview
There is an embedded version of it in the Tape & Reel (TR) package.20-TSSOP (0.173, 4.40mm Width) is how it's packaged.I would like to inform you that this PoE controller is of the Controller (PD), DC/DC type.Channel growth is strong or weak: 1.In order to ensure PoE reliability, it is designed to operate at a temperature of -40°C~125°C.Electricity is supplied to this Po E controller by voltage 0V~57V.Using the base part number of a part TPS23757, it is possible to determine its Po E controllers.It is possible to terminate a transmission line with a 20 termination by connecting a power over ethernet controller with a matching impedance to the transmission line.20 pins are equipped with it.920μA is the amount of supply current that is available.The Po E controller in question is included in the package Switching Regulator or Controllers.The board has 20 pins.In the case of this electrical ethernet power controller, the peak reflow temperature (Cel) is 260 degrees Celsius.278kHz is the maximum switching frequency of this electrical PoE power over ethernet controller.There is a maximum input voltage of 57V for this electrical power over ethernet PoE controller.This power over the ethernet controller's maximum voltage output is 0.535A.This power over ethernet devices's minimal input voltage is 5.8V.
TPS23757PWR Features
Tape & Reel (TR) package
20 pin count
20 pins
TPS23757PWR Applications
There are a lot of Texas Instruments TPS23757PWR Power Over Ethernet (PoE) Controllers applications.
- Security Cameras
- PoE powered device appliances
- Commercial Information Displays
- Wireless LAN Access Point/WiMAX? Base Station
- Industrial Automation Equipment
- IEEE 802.3af Compliant PoE Powered Devices
- IP Phone Power Management
- IEEE 802.3bt (Draft) Compliant Devices
- Security Cameras
- High Power Wireless Data Systems
