TPS2375DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Controller (PD) |
| Resistance | 1Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 0V~57V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Base Part Number | TPS2375 |
| Pin Count | 8 |
| Operating Supply Voltage | 57V |
| Number of Channels | 1 |
| Operating Supply Current | 240μA |
| Output Current | 350mA |
| Adjustable Threshold | NO |
| Output Power | 12.95W |
| Supply Current-Max (Isup) | 0.45mA |
| Nominal Input Voltage | 57V |
| Internal Switch(s) | Yes |
| Min Current Limit | 405mA |
| Standards | 802.3af (PoE) |
| Auxiliary Sense | No |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2375DG4 Overview
The Tube package contains it.It is the way it is packaged that makes it 8-SOIC (0.154, 3.90mm Width).In this application, it is an PoE controller that is of the Controller (PD) type.The number of channels is growing strong/weak: 1.As a precaution, the operating temperature of this Po E controller is kept at -40°C~85°C in order to maintain its reliability.A 0V~57V voltage is used to supply power to this electrical Po E controller.An associated part can be established based on the base part number TPS2375.A 8 termination involves terminating a transmission line with a power over ethernet controller whose characteristic impedance matches the line's.The ethernet over power controller has 8 pins.The Po E controller in question is Po E controller of Power Management Circuits.As you can see, it is designed with 8 pins.There is a 260 thermal peak of this electrical ethernet power controller (Cel).A voltage higher than 48V should be applied to the supply.The maximal current (Isup) supplied for its operation reaches 0.45mA.For 240μA to perform fully, a supply current must be provided.350mA features maximum design flexibility due to its output current.The operating supply voltage of this PoE controller is 57V.Its resistance is 1Ohm (Ω).This ethernet over power controller has an output power of 12.95W watts.
TPS2375DG4 Features
Tube package
8 pin count
8 pins
The output current of 350mA
1Ohm (Ω)
TPS2375DG4 Applications
There are a lot of Texas Instruments TPS2375DG4 Power Over Ethernet (PoE) Controllers applications.
- Midspan Applications
- Routers
- Wireless Access Points
- Pass-through System
- IEEE 802.3bt (Draft) Compliant Devices
- POS Terminals
- Switches
- High Power Wireless Data Systems
- WLAN Access Points
- Multiband access points
