TPS2377PW
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Controller (PD) |
| Resistance | 1Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 251mW |
| Voltage - Supply | 0V~57V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2377 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 240μA |
| Power Dissipation | 13W |
| Output Current | 350mA |
| Adjustable Threshold | NO |
| Power - Max | 12.95W |
| Supply Current-Max (Isup) | 0.45mA |
| Nominal Input Voltage | 57V |
| Internal Switch(s) | Yes |
| Min Current Limit | 405mA |
| Standards | 802.3af (PoE) |
| Auxiliary Sense | No |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
TPS2377PW Overview
There is an embedded version of it in the Tube package.It is packaged in a way that resembles 8-TSSOP (0.173, 4.40mm Width).PoE controllers of this type are called Controller (PD).There is a strong/weak growth in the number of channels: 1.As a precaution, the operating temperature of this Po E controller is kept at -40°C~85°C in order to maintain its reliability.There is a voltage of 0V~57V that is used for the supply voltage of this electrical Po E controller.A part number's Po E controllers of TPS2377 can be determined by its base number.It is possible to terminate a transmission line with a 8 termination by connecting a power over ethernet controller with a matching impedance to the transmission line.The maximal power of this electrical ethernet over power controller is 12.95W Watts.In addition, it comes with a 8 pin count.A Po E controller like this is included in Power Management Circuits.A 8-pin design is used in it.There is a 260 thermal peak of this electrical ethernet power controller (Cel).There should be more voltage supplied than 48V.The maximum current that can be provided for its operation (Isup) is reached at 0.45mA.As a requirement for 240μA to function properly, it must be supplied with a current.350mA features maximum design flexibility due to its output current.Resistance of this PoE controller is 1Ohm (*), which is the value of the resistance.
TPS2377PW Features
Tube package
8 pin count
8 pins
The output current of 350mA
1Ohm (Ω)
TPS2377PW Applications
There are a lot of Texas Instruments TPS2377PW Power Over Ethernet (PoE) Controllers applications.
- Pico-base Stations
- Higher Power Ethernet Powered Devices
- High Temperature Industrial Applications
- Wireless LAN Access Point/WiMAX? Base Station
- Switches
- WLAN Access Points
- High power (>12.95 W) powered devices
- Single-Port PSE End-Point Applications
- Security Cameras
- Security Cameras
