TPS23841PAP
| Parameters | |
|---|---|
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Package / Case | 64-PowerTQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 258.207457mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Type | Controller (PSE) |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 21.5V~57V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.5mm |
| Frequency | 400kHz |
| Base Part Number | TPS23841 |
| Pin Count | 64 |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 21.5V |
| Number of Channels | 4 |
| Output Current | 700mA |
| Adjustable Threshold | NO |
| Power - Max | 25W |
| Current - Supply | 10mA |
| Min Input Voltage | 34V |
| Max Input Voltage | 57V |
| Nominal Input Voltage | 48V |
| Internal Switch(s) | Yes |
| Min Current Limit | 571mA |
| Standards | 802.3af (PoE) |
| Auxiliary Sense | No |
| Height | 1.2mm |
| Length | 10mm |
| Width | 10mm |
TPS23841PAP Overview
It is embedded in the Tray package.It is packaged in the way of 64-PowerTQFP.Controller (PSE) is the type of PoE controller that this is.Channels are growing strong/weak depending on the category: 4.In order to ensure its reliability, PoE operates at the operating temperature of -40°C~125°C.Electricity is supplied to this Po E controller by voltage 21.5V~57V.There is a possibility of determining its Po E controllers by referring to the base part number TPS23841.A 64 termination involves terminating the transmission line with a power over ethernet controller of the same impedance as the line.As far as the maximum power of this electrical ethernet over power controller is concerned, it is 25W Watts.In addition, it comes with a 64 pin count.Taking into account the supply current, 10mA is the value.As Po E controller of Power Management Circuits, this Po E controller is included.This board is designed with 64 pins.There is a 260 thermal peak of this electrical ethernet power controller (Cel).The supply voltage should be greater than 48V.Upon reaching 21.5V, the minimal current (Vsup) required for its operation is reached.At 400kHz frequencies, this electrical PoE ethernet controller operates.700mA features maximum design flexibility due to its output current.PoE controllers operate at 48V volts.As far as the input voltage of this power over ethernet PoE controller is concerned, it has a maximum value of 57V.The minimal input voltage of this power over the ethernet controller is 34V.
TPS23841PAP Features
Tray package
64 pin count
64 pins
The output current of 700mA
TPS23841PAP Applications
There are a lot of Texas Instruments TPS23841PAP Power Over Ethernet (PoE) Controllers applications.
- Commercial Information Displays
- Industrial Automation Equipment
- Multiband access points
- Security Cameras
- Single-Port PSE End-Point Applications
- Switches
- 4PPOE
- Pico-base Stations
- Wireless Access Points
- IP Phone Power Management
