TPS23841PJDR
| Parameters | |
|---|---|
| Package / Case | 64-TQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 248.398522mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Type | Controller (PSE) |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 21.5V~57V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS23841 |
| Pin Count | 64 |
| Supply Voltage-Min (Vsup) | 21.5V |
| Number of Channels | 4 |
| Adjustable Threshold | NO |
| Power - Max | 25W |
| Current - Supply | 10mA |
| Min Input Voltage | 34V |
| Max Input Voltage | 57V |
| Nominal Input Voltage | 48V |
| Internal Switch(s) | Yes |
| Min Current Limit | 571mA |
| Standards | 802.3af (PoE) |
| Auxiliary Sense | No |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS23841PJDR Overview
The package Tape & Reel (TR) includes it.It is packaged in the way of 64-TQFP Exposed Pad.PoE controller type Controller (PSE).It has been reported that the number of channels is growing strongly/weakly: 4.For a reliable operation, -40°C~125°C is the PoE operating temperature.There is a voltage of 21.5V~57V that is used for the supply voltage of this electrical Po E controller.A part number's Po E controllers of TPS23841 can be determined by its base number.In a 64 termination, a transmission line is terminated with an impedance-matched power over ethernet controller.It is estimated that this electrical ethernet over power controller has a maximum power of 25W Watts.64 pins are equipped with it.There is a supply current of 10mA in the system.There is a Po E controller like this in Power Management Circuits.There is a 64 pin design on this board.A transistor has a peak reflow temperature (Cel) of 260.A voltage higher than 48V should be applied to the supply.In order for this PoE ethernet controller to function, a minimal current (Vsup) of 21.5V is required for its operation.An power over ethernet PoE controller of this type has a maximum input voltage of 57V.Power over the ethernet controllers like this require a minimum input voltage of 34V.
TPS23841PJDR Features
Tape & Reel (TR) package
64 pin count
64 pins
TPS23841PJDR Applications
There are a lot of Texas Instruments TPS23841PJDR Power Over Ethernet (PoE) Controllers applications.
- Higher Power Ethernet Powered Devices
- Switches
- IEEE 802.3af Compliant PoE Powered Devices
- VoIP Phones
- IEEE 802.3bt (Draft) Compliant Devices
- Security Cameras
- Multiband access points
- IP Phone Power Management
- Security Cameras
- Power Modules
