TPS2390DGK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Latched Fault, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | -48V |
| Subcategory | Power Management Circuits |
| Voltage - Supply | -80V~-36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Depth | 3.1mm |
| Base Part Number | TPS2390 |
| Pin Count | 8 |
| Output Voltage | 48V |
| Number of Channels | 1 |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 1.5mA |
| Adjustable Threshold | YES |
| Current - Supply | 700μA |
| Output Current-Max | 500A |
| Neg Supply Voltage-Nom (Vsup) | -48V |
| Nominal Input Voltage | -36V |
| Threshold Voltage | +1.35 |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, Slew Rate |
| Feature Pins | EN, /FAULT, FLTTIME, IRAMP |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2390DGK Overview
As part of the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is included.In the current state, 1 channels are accessible.In the form of a Tube, it is packaged.The 8 terminations total to three.Device position DUAL is its terminal position.The device has a total of 8 pins.It's?set?up?in?the?way?of?Surface Mount.Hot Swap Controller?is?the?classification?for?this?electrical?component.Ensure reliable operation by setting the temperature to -40°C~85°C.There are -48V applications available for the device.There is a reference to it in Latched Fault, UVLO.The device should be able to be powered by a -80V~-36VV power source.Numbers in the TPS2390 family include it.8 pins are used to operate the system.Power Management Circuits contains this gadget all by itself.Current Limit, Fault Timeout, Slew Rate is the number of features it can be programmed with.700μA is currently in short supply.Surface Mount directs its position.Hot Swap requires 1.5mA volts of current to operate.In the case of a 48V output voltage, high efficiency can be achieved.
TPS2390DGK Features
The terminal position of 8
Features of Latched Fault, UVLO
Programmable features of Current Limit, Fault Timeout, Slew Rate
Output voltage of 48V
TPS2390DGK Applications
There are a lot of Texas Instruments TPS2390DGK hot swap controllers applications.
- Telecom server
- Short-circuit protection in real time
- Backplane
- Hard drive
- Circuit breakers for electronic circuits
- Disconnect faulty loads before supply voltage drops
- Storage network
- Distributed power systems
- USB interface
- Raid
