TPS2391DGK
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Auto Retry, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | -48V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 420mW |
| Voltage - Supply | -80V~-36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Depth | 3.1mm |
| Base Part Number | TPS2391 |
| Pin Count | 8 |
| Output Voltage | 65V |
| Number of Channels | 1 |
| Operating Supply Current | 1.5mA |
| Max Supply Current | 1.5mA |
| Adjustable Threshold | YES |
| Output Current-Max | 500A |
| Neg Supply Voltage-Nom (Vsup) | -48V |
| Nominal Input Voltage | -36V |
| Threshold Voltage | +1.35 |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, Slew Rate |
| Feature Pins | EN, /FAULT, FLTTIME, IRAMP |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
TPS2391DGK Overview
You get it with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.As of now, 1 channels are available.There is a Tube-shaped package for it.Hot-swappable device has a total of 8 terminations.Device DUAL is in the terminal position.The device consists of a total of 8 pins.Surface Mount has set it up this way.Electrical components classified as Hot Swap Controller are referred to as Hot Swap Controller components.For reliable performance, the temperature should be set to -40°C~85°C.-48V applications are available on the device.Auto Retry, UVLO features it.In the case of a -80V~-36VV power source, it should work just fine.Hot-swappable device is included in the TPS2391 family of numbers.8 pins are used to operate the system.Power Management Circuits contains this gadget on its own.Programmable features include Current Limit, Fault Timeout, Slew Rate.The position of the object is in the direction of Surface Mount.In this case, 1.5mA is the operative supply current.In order for it to operate, a current of 1.5mA is required.There is no problem with a 65V output voltage if you want high efficiency.
TPS2391DGK Features
The terminal position of 8
Features of Auto Retry, UVLO
Programmable features of Current Limit, Fault Timeout, Slew Rate
Output voltage of 65V
TPS2391DGK Applications
There are a lot of Texas Instruments TPS2391DGK hot swap controllers applications.
- Comprehensive analog and digital capabilities
- Hard drive
- Automatic restart after load failure
- Avionics systems
- Raid
- Reverse current protection
- Microcontrollers
- Industrial
- Power monitoring
- PC board hot swap insertion and removal
