TPS2391DGKRG4
| Parameters | |
|---|---|
| Terminal Pitch | 0.65mm |
| Depth | 3.1mm |
| Base Part Number | TPS2391 |
| Pin Count | 8 |
| Output Voltage | 65V |
| Number of Channels | 1 |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 1.5mA |
| Adjustable Threshold | YES |
| Current - Supply | 700μA |
| Output Current-Max | 500A |
| Neg Supply Voltage-Nom (Vsup) | -48V |
| Nominal Input Voltage | -36V |
| Threshold Voltage | +1.35 |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, Slew Rate |
| Feature Pins | EN, /FAULT, FLTTIME, IRAMP |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto Retry, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | -48V |
| Subcategory | Power Management Circuits |
| Voltage - Supply | -80V~-36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
TPS2391DGKRG4 Overview
The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package includes it.As of now, 1 channels are available.The package looks like a Tape & Reel (TR).There are 8 terminations in total.In this case, the device is located at terminal DUAL.Hot-swappable device has a total of 8 pins on Hot-swappable device.As Surface Mount would say, it's set up like that.This electrical component is classified as Hot Swap Controller.A temperature setting of -40°C~85°C will ensure reliable operation.-48V applications can be downloaded from the device.An article about it appears in Auto Retry, UVLO.Using a -80V~-36VV power source should be able to power the device.The TPS2391 family includes it.A 8 pin is used for operation.Power Management Circuits contains this gadget on its own.Current Limit, Fault Timeout, Slew Rate is its programmable feature.700μA is currently in short supply.Surface Mount directs its position.Its maximum current requirement is 1.5mA.There is no problem with a 65V output voltage if you want high efficiency.
TPS2391DGKRG4 Features
The terminal position of 8
Features of Auto Retry, UVLO
Programmable features of Current Limit, Fault Timeout, Slew Rate
Output voltage of 65V
TPS2391DGKRG4 Applications
There are a lot of Texas Instruments TPS2391DGKRG4 hot swap controllers applications.
- Redundant negative voltage supplies
- Power supply hotswap & inrush control
- Other forms of communications infrastructure
- Firewire
- Undervoltage protection
- High power circuit board
- Network router
- CompactPCI
- Servers
- Industrial
