TPS2393APW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Auto Retry |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | -48V |
| Subcategory | Power Management Circuits |
| Voltage - Supply | -80V~-20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Depth | 4.5mm |
| Base Part Number | TPS2393 |
| Pin Count | 14 |
| Output Voltage | 65V |
| Power Supplies | -48V |
| Number of Channels | 1 |
| Nominal Supply Current | 1.7mA |
| Max Supply Current | 1.7mA |
| Adjustable Threshold | YES |
| Current - Supply | 1.05mA |
| Output Current-Max | 500A |
| Neg Supply Voltage-Nom (Vsup) | -48V |
| Nominal Input Voltage | -20V |
| Threshold Voltage | +1.35 |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, OVP, Slew Rate, UVLO |
| Feature Pins | EN, /FAULT, FLTTIME, INSA, INSB, IRAMP, OVLO, /PG, UVLO |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2393APW Overview
You can find it in the 14-TSSOP (0.173, 4.40mm Width) package.At present, 1 channels are available.There is a Tube-shaped package for it.In total, it has 14 terminations.A device's terminal position is DUAL.The device consists of a total of 14 pins.This is set up in the same way as Surface Mount.This electrical component is classified as Hot Swap Controller.A temperature setting of -40°C~85°C will ensure reliable operation.-48V applications can be downloaded from the device.In Auto Retry, it is featured.Hot-swappable device should be able to work wHot-swappable deviceh a power source of -80V~-20VV.In the TPS2393 family, it appears as a number.For operation, 14 pins are used.The gadget in Power Management Circuits is self-contained.There are Current Limit, Fault Timeout, OVP, Slew Rate, UVLO features that can be programmed.1.05mA is currently in short supply.In Surface Mount direction, it is positioned.In terms of power supplies, it is the character -48V that appears on the part.1.7mA is the maximum current required for its operation.There is no problem with a 65V output voltage if you want high efficiency.
TPS2393APW Features
The terminal position of 14
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
Output voltage of 65V
TPS2393APW Applications
There are a lot of Texas Instruments TPS2393APW hot swap controllers applications.
- Overcurrent protection
- Network router
- Automatic restart after load failure
- Active current limit
- Circuit breakers for electronic circuits
- Circuit breakers for high-side circuits
- Distributed power systems
- Disconnect faulty loads before supply voltage drops
- ISDN system
- Limitting the inrush current
