TPS2393APWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto Retry |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | -48V |
| Subcategory | Power Management Circuits |
| Voltage - Supply | -80V~-20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Depth | 4.5mm |
| Base Part Number | TPS2393 |
| Pin Count | 14 |
| Output Voltage | 65V |
| Power Supplies | -48V |
| Number of Channels | 1 |
| Nominal Supply Current | 1.7mA |
| Max Supply Current | 1.7mA |
| Adjustable Threshold | YES |
| Current - Supply | 1.05mA |
| Output Current-Max | 500A |
| Neg Supply Voltage-Nom (Vsup) | -48V |
| Nominal Input Voltage | -20V |
| Threshold Voltage | +1.35 |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, OVP, Slew Rate, UVLO |
| Feature Pins | EN, /FAULT, FLTTIME, INSA, INSB, IRAMP, OVLO, /PG, UVLO |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2393APWRG4 Overview
You get it with the 14-TSSOP (0.173, 4.40mm Width) package.Currently, 1 channels can be accessed.The package resembles a Tape & Reel (TR).Total terminations are 14.Device DUAL is located at the terminal position.The device consists of a total of 14 pins.The way it's set up is the way Surface Mount wants it.In electrical components, Hot Swap Controller is the classification.Hot-swappable device is recommended that the temperature is set to -40°C~85°C in order to ensure reliable performance.There are -48V applications on the device.Hot-swappable device is featured in Auto Retry.The device should be able to be powered by a -80V~-20VV power source.Numbers in the TPS2393 family include it.Hot-swappable device is necessary to use 14 pins in order to operate the device.The gadget in Power Management Circuits is self-contained.Current Limit, Fault Timeout, OVP, Slew Rate, UVLO is the number of features it can be programmed with.Currently, 1.05mA is in short supply.Hot-swappable device is posHot-swappable deviceioned in the direction of Surface Mount.Hot-swappable device has a -48V power supply, which is the power supply used in the part.Its maximum current requirement is 1.7mA.In the case of a 65V output voltage, high efficiency can be achieved.
TPS2393APWRG4 Features
The terminal position of 14
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
Output voltage of 65V
TPS2393APWRG4 Applications
There are a lot of Texas Instruments TPS2393APWRG4 hot swap controllers applications.
- Undervoltage protection
- Temperature monitor output
- Switch
- Disconnect faulty loads before supply voltage drops
- Power supply hotswap & inrush control
- Other forms of communications infrastructure
- Microcontrollers
- Loads
- Telecommunications
- DC boost circuit
