TPS2393PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto Retry |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | -48V |
| Subcategory | Power Management Circuits |
| Voltage - Supply | -80V~-20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Depth | 4.5mm |
| Base Part Number | TPS2393 |
| Pin Count | 14 |
| Output Voltage | 65V |
| Power Supplies | -48V |
| Number of Channels | 1 |
| Nominal Supply Current | 1.7mA |
| Adjustable Threshold | YES |
| Current - Supply | 1.05mA |
| Output Current-Max | 500A |
| Supply Current-Max (Isup) | 3mA |
| Neg Supply Voltage-Nom (Vsup) | -48V |
| Nominal Input Voltage | -20V |
| Threshold Voltage | +1.35 |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, OVP, Slew Rate, UVLO |
| Feature Pins | EN, /FAULT, FLTTIME, INSA, INSB, IRAMP, OVLO, /PG, UVLO |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2393PWR Overview
You get it with the 14-TSSOP (0.173, 4.40mm Width) package.Currently, there are 1 channels accessible.Hot-swappable device comes in the shape of a Tape & Reel (TR).This device has a total of 14 terminations.This device has a terminal position of DUAL.The device consists of a total of 14 pins.According to Surface Mount, it has been set up.Hot Swap Controller?is?the?classification?for?this?electrical?component.The temperature should be set to -40°C~85°C to ensure reliable functioning.Hot-swappable device has -48V applications.An article about it appears in Auto Retry.Hot-swappable device should work if you use a -80V~-20VV power source.TPS2393 numbers belong to this family.14 pins are used in operation.Power Management Circuits contains this gadget on its own.Its programmable features are Current Limit, Fault Timeout, OVP, Slew Rate, UVLO.The current supply of 1.05mA.Surface Mount is its direction of movement.The power supply of the part is referred to as -48V.3mA is its maximum supply current.There is no problem with a 65V output voltage if you want high efficiency.
TPS2393PWR Features
The terminal position of 14
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
Output voltage of 65V
TPS2393PWR Applications
There are a lot of Texas Instruments TPS2393PWR hot swap controllers applications.
- Safe board insertion and extraction
- USB interface
- Disconnect faulty loads before supply voltage drops
- Servers
- Automatic restart after load failure
- Circuit breakers for high-side circuits
- Identify faulty boards
- Continuous monitoring of device temperature
- Industrial application
- Raid
