TPS2411PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | N+1 Power Supplies, High Availability |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2411 |
| Pin Count | 14 |
| Output Voltage | 10.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 4.25mA |
| Power Dissipation | 250mW |
| Quiescent Current | 1.2mA |
| Min Input Voltage | 800mV |
| FET Type | N-Channel |
| Max Input Voltage | 16.5V |
| Nominal Input Voltage | 16.5V |
| Turn-Off Delay Time | 130 ns |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2411PWR Overview
A 14-TSSOP (0.173, 4.40mm Width) case is included with it. As a result, it is suitable for packing the part in the Tape & Reel (TR) case. Surface Mount is the way the part is mounted. We give it a voltage of 3V~16.5V in order to test it. In order for this component to operate correctly, its minimum operating temperature must not be -40°C~85°C. It is suitable for the component connected in N+1 Power Supplies, High Availability. N+1 ORing Controller represents the device category. It is possible to recognize the FET type as N-Channel. The part is available with 14 terminations. 14 pins are used in the design of this product. TPS2411 is the basis for the part. This device is powered by 5V in order to deliver a high level of performance. In order to run 260, a part's peak reflow temperature is utilized. A Power Management Circuits family part is involved in the project. Among the pins on the part are 14 pins. Voltage supply (Vsup) for this part should not be less than 3V. A supply current of 4.25mA is used to operate the device when it is in operation. It can work with voltages greater than 16.5VV as an input voltage. With an input voltage less than 800mV volts, it is possible to use the chip. 10.2V is the maximum output voltage of this device. At 1.2mA, it uses the quiescent current as its power source.
TPS2411PWR Features
in a 14-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
14 terminations
Peak Reflow Temperature (Cel) : 260
TPS2411PWR Applications
There are a lot of Texas Instruments TPS2411PWR Ideal Diode controller applications.
- Asset tracker
- Camera ECU
- AC Rectifier
- Alternator
- Industrial transport
- ADAS domain controller
- Active OR-ing of Redundant (N+1) Power Supplies
- PCs
- Digital Cameras
- Power Tools
