TPS2412DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 69.994973mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | N+1 ORing Controller |
| Applications | N+1 Power Supplies, High Availability |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2412 |
| Pin Count | 8 |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 4.25mA |
| Nominal Supply Current | 4.25mA |
| Power Dissipation | 410mW |
| Output Current | 290μA |
| Quiescent Current | 1.2mA |
| Min Input Voltage | 800mV |
| FET Type | N-Channel |
| Max Input Voltage | 16.5V |
| Turn-Off Delay Time | 130 ns |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2412DR Overview
There is a 8-SOIC (0.154, 3.90mm Width) case that comes with it. A Tape & Reel (TR) case is a good choice for packing the part. Surface Mount is the way the part is mounted. We give it a voltage of 3V~16.5V in order to test it. A minimum operating temperature of -40°C~85°C must not be reached by this component. It is suitable for the component connected in N+1 Power Supplies, High Availability. As a N+1 ORing Controller-type device, it is categorized. There is a N-Channel type of FET. Among the options available for the part are 8 terminations. There are 8 pins on it. As you can see, this part is based on TPS2412. It is powered by 5V to deliver its perfomance. As part of the 260 process, the peak reflow temperature of this part is utilized. This part is part of the Power Management Circuits family of parts. In this part, there are 8 pins. This part should have a voltage supply of at least 3V (Vsup). This device is powered by 4.25mA, which is the supply current it uses to operate. Using the chip over 16.5V volts is allowed. There are certain situations in which the chip can be used with input voltages as low as 800mV V. As a result of this, 290μA is the maximum output current that is capable of being delivered to the component. A quiescent current is used at 1.2mA for this purpose.
TPS2412DR Features
in a 8-SOIC (0.154, 3.90mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
TPS2412DR Applications
There are a lot of Texas Instruments TPS2412DR Ideal Diode controller applications.
- Asset tracker
- USB HUBs
- Automotive battery protection
- Active OR-ing of Redundant (N+1) Power Supplies
- Building automation
- Active ORing for redundant power
- Power supply reverse polarity protection
- Alternator
- Factory automation and control - PLC digital output modules
- MP3 Players
