TPS2412PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | N+1 ORing Controller |
| Applications | N+1 Power Supplies, High Availability |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2412 |
| Pin Count | 8 |
| Output Voltage | 10.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 4.25mA |
| Nominal Supply Current | 4.25mA |
| Power Dissipation | 250mW |
| Output Current | 290μA |
| Quiescent Current | 1.2mA |
| Min Input Voltage | 800mV |
| FET Type | N-Channel |
| Max Input Voltage | 16.5V |
| Nominal Input Voltage | 16.5V |
| Turn-Off Delay Time | 130 ns |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2412PWR Overview
It comes in 8-TSSOP (0.173, 4.40mm Width) case. The Tape & Reel (TR) case is ideal for packing the part. The part is mounted in the way of Surface Mount. An electric current of 3V~16.5V is applied to it. It is essential that the minimal operating temperature of this component is not -40°C~85°C. It is suitable for the component connected in N+1 Power Supplies, High Availability. Device N+1 ORing Controller belongs to the N+1 ORing Controller category. It is possible to recognize the FET type as N-Channel. In the part there are 8 terminations that are available. Pins are positioned on 8 axes. The part is based on TPS2412. In order to deliver its performance, it is powered by 5V. For 260, the peak reflow temperature of this part is used. Part of the Power Management Circuits family. It is a part that has 8 pins in it. It is important that Vsup for this part does not fall below 3V. A supply current of 4.25mA is used to operate the device when it is in operation. The chip can be used with an input voltage of more than 16.5V V. A voltage less than 800mVV can be used to drive the chip. As a result, 290μA is the maximum output current that can be delivered to the component. This device's maximum output voltage is 10.2V. At 1.2mA, it uses the quiescent current as its power source.
TPS2412PWR Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
TPS2412PWR Applications
There are a lot of Texas Instruments TPS2412PWR Ideal Diode controller applications.
- USB HUBs
- Power Tools
- Cell phones
- Motor drives
- Factory automation and control - PLC digital output modules
- Automotive battery protection
- PCs
- Asset tracker
- Alternator
- AC Rectifier
