Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
40.001177mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Type |
N+1 ORing Controller |
Applications |
N+1 Power Supplies, High Availability |
Subcategory |
Power Management Circuits |
Voltage - Supply |
3V~16.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
TPS2412 |
Pin Count |
8 |
Output Voltage |
10.2V |
Supply Voltage-Min (Vsup) |
3V |
Number of Channels |
1 |
Operating Supply Current |
4.25mA |
Nominal Supply Current |
4.25mA |
Power Dissipation |
250mW |
Output Current |
290μA |
Quiescent Current |
1.2mA |
Min Input Voltage |
800mV |
FET Type |
N-Channel |
Max Input Voltage |
16.5V |
Nominal Input Voltage |
16.5V |
Turn-Off Delay Time |
130 ns |
Ratio - Input:Output |
N:1 |
Internal Switch(s) |
No |
Height |
1.2mm |
Length |
3mm |
Width |
4.4mm |
Thickness |
1mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2412PWRG4 Overview
A 8-TSSOP (0.173, 4.40mm Width) case is included with it. Packing the part in Tape & Reel (TR) cases is ideal. Part Surface Mount is mounted. It is given a voltage of 3V~16.5V. This component's minimum operating temperature must not be -40°C~85°C. The component connected to N+1 Power Supplies, High Availability is a good match for this component. The device is categorized as N+1 ORing Controller. It is possible to recognize the FET type as N-Channel. The part comes with 8 terminations. The device is designed with 8 pins. As you can see, this part is based on TPS2412. Powered by 5V, it delivers high performance. To run 260, we use the peak reflow temperature of this part. This part is part of the Power Management Circuits family of parts. There are 8 pins in the part. Voltage supply (Vsup) for this part should not be less than 3V. The supply current used for its operating is 4.25mA. It is possible to use the chip with voltages greater than 16.5V volts. There are certain situations in which the chip can be used with input voltages as low as 800mV V. In this case, 290μA is a value that represents the maximum output current that can be delivered to the component. A maximum output voltage of 10.2V can be obtained from this device. During quiescent current, 1.2mA is used as the current source.
TPS2412PWRG4 Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
TPS2412PWRG4 Applications
There are a lot of Texas Instruments TPS2412PWRG4 Ideal Diode controller applications.
- AC Rectifier
- Digital Radios
- Active OR-ing of Redundant (N+1) Power Supplies
- PDAs
- Modems
- Industrial transport
- Alternator
- Industrial motor drives
- Power Tools
- Automotive ADAS systems - camera