TPS2413DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 69.994973mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | N+1 ORing Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | N+1 Power Supplies, High Availability |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2413 |
| Pin Count | 8 |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 4.25mA |
| Nominal Supply Current | 4.25mA |
| Power Dissipation | 410mW |
| Output Current | 290μA |
| Quiescent Current | 1.2mA |
| Min Input Voltage | 800mV |
| FET Type | N-Channel |
| Max Input Voltage | 16.5V |
| Turn-Off Delay Time | 130 ns |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2413DR Overview
The case is 8-SOIC (0.154, 3.90mm Width)-shaped. As a result, it is suitable for packing the part in the Tape & Reel (TR) case. In this case, the part is mounted in the direction of Surface Mount. The voltage is set to 3V~16.5V. It is not acceptable to operate this component below -40°C~85°C degrees Celsius. It is fitting for the component connected in N+1 Power Supplies, High Availability. Device N+1 ORing Controller belongs to the N+1 ORing Controller category. In the case of FETs, N-Channel is recognized as the type. 8 terminations are available in the part. It is designed with 8 pins. As you can see, this part is based on TPS2413. 5V provides its performance. To run 260, we utilize the part's peak reflow temperature. It is part of the Power Management Circuits family. It is important to note that the part has 8 pins. It is important that Vsup for this part does not fall below 3V. This device is powered by 4.25mA, which is the supply current it uses to operate. It is possible to use this chip with an input voltage that exceeds 16.5V volts. Input voltages less than 800mV Volts are suitable for this chip, as long as the voltage input is not excessive. In this case, 290μA is a value that represents the maximum output current that can be delivered to the component. A quiescent current is used at 1.2mA for this purpose.
TPS2413DR Features
in a 8-SOIC (0.154, 3.90mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
TPS2413DR Applications
There are a lot of Texas Instruments TPS2413DR Ideal Diode controller applications.
- Industrial transport
- Automotive battery protection
- Active ORing for redundant power
- Digital Radios
- Camera ECU
- Automotive infotainment systems - head unit,telematics control unit
- Alternator
- Cell phones
- Active OR-ing of Redundant (N+1) Power Supplies
- Automotive USB hubs
