TPS2413DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | N+1 ORing Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | N+1 Power Supplies, High Availability |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2413 |
| Pin Count | 8 |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 4.25mA |
| Nominal Supply Current | 4.25mA |
| Power Dissipation | 410mW |
| Output Current | 290μA |
| Quiescent Current | 1.2mA |
| Min Input Voltage | 800mV |
| FET Type | N-Channel |
| Max Input Voltage | 16.5V |
| Supply Current-Max (Isup) | 6mA |
| Turn-Off Delay Time | 130 ns |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2413DRG4 Overview
This item comes in a 8-SOIC (0.154, 3.90mm Width) case. Parts should be packed in Tape & Reel (TR) cases. There are two ways in which this part is mounted. It is given a voltage of 3V~16.5V. A minimum operating temperature of -40°C~85°C must not be reached by this component. It is suitable for the component connected in N+1 Power Supplies, High Availability. N+1 ORing Controller represents the device category. A type of FET known as N-Channel is a type of FET that can be recognized by its symbol, which can be found on the package. A 8 termination is available on the part. It is designed with 8 pins. TPS2413 underpins the part. Powered by 5V, it delivers high performance. To run 260, we utilize the part's peak reflow temperature. It is a part from the Power Management Circuits family. As you can see, the part is equipped with 8 pins. A voltage supply (Vsup) that is less than 3V should not be used for this part. For the operation of this device, an electric current of 4.25mA is used as the supply current. In order to conduct under 6mA, the supply current (Isup) should be conducted. The chip can be used with an input voltage of more than 16.5V V. It is possible to use this chip with an input voltage below 800mV volts. 290μA is the output current that can be delivered to the component in terms of its output voltage. There is a quiescent current at 1.2mA that is used.
TPS2413DRG4 Features
in a 8-SOIC (0.154, 3.90mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
TPS2413DRG4 Applications
There are a lot of Texas Instruments TPS2413DRG4 Ideal Diode controller applications.
- Alternator
- USB HUBs
- Head Unit
- MP3 Players
- ADAS domain controller
- PCs
- Electronic point of sale
- Active OR-ing of Redundant (N+1) Power Supplies
- PDAs
- Electricity meters
