TPS2413PW
| Parameters | |
|---|---|
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | N+1 Power Supplies, High Availability |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 250mW |
| Voltage - Supply | 3V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2413 |
| Pin Count | 8 |
| Output Voltage | 10.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 4.25mA |
| Power Dissipation | 250mW |
| Output Current | 290μA |
| Quiescent Current | 1.2mA |
| Min Input Voltage | 800mV |
| FET Type | N-Channel |
| Max Input Voltage | 16.5V |
| Nominal Input Voltage | 16.5V |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 130ns |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
TPS2413PW Overview
The case is made of 8-TSSOP (0.173, 4.40mm Width) plastic. A Tube case is a good choice for packing the part. The part is mounted in the way of Surface Mount. A voltage of 3V~16.5V is applied to it. A minimum operating temperature of -40°C~85°C must not be reached by this component. There is a perfect fit between it and the component connected in N+1 Power Supplies, High Availability. As far as the device classification is concerned, it falls under the N+1 ORing Controller category. A type of FET known as N-Channel is a type of FET that can be recognized by its symbol, which can be found on the package. There are 8 terminations available in the part. There are 8 pins on the board and it is designed with them. It is based on TPS2413. 5V provides its performance. As part of the 260 process, the peak reflow temperature of this part is utilized. Part of the Power Management Circuits family. Several 8 pins are incorporated into the part. A voltage supply (Vsup) that is less than 3V should not be used for this part. In order for it to operate, it uses a supply current called 4.25mA. Using the chip over 16.5V volts is allowed. It is possible to use this chip with an input voltage below 800mV volts. 290μA is the output current that can be delivered to the component in terms of its output voltage. Its max output voltage amounts to 10.2V. 1.2mA utilizes quiescent current.
TPS2413PW Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
TPS2413PW Applications
There are a lot of Texas Instruments TPS2413PW Ideal Diode controller applications.
- Camera ECU
- Electronic point of sale
- Automotive battery protection
- Asset tracker
- Automotive ADAS systems - camera
- Active ORing for redundant power supplies
- Automotive USB hubs
- Active ORing for redundant power
- Industrial transport
- Power Tools
