TPS2419PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | N+1 ORing Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | N+1 Power Supplies, High Availability |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2419 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Power Dissipation | 250mW |
| Quiescent Current | 1.2mA |
| Current - Supply | 4.25mA |
| Min Input Voltage | 800mV |
| FET Type | N-Channel |
| Max Input Voltage | 16.5V |
| Nominal Input Voltage | 16.5V |
| Turn-Off Delay Time | 70 ns |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 130ns |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2419PW Overview
A 8-TSSOP (0.173, 4.40mm Width) case is included. A Tube case is a good choice for packing the part. There is a Surface Mount-axis mounted on the part. A voltage of 3V~16.5V is applied to it. A minimum operating temperature of -40°C~85°C must not be reached by this component. It is fitting for the component connected in N+1 Power Supplies, High Availability. As far as the device classification is concerned, it falls under the N+1 ORing Controller category. Among all the types of FETs, there is a type which is known as N-Channel, which can be recognized by its graphical representation. Among the options available for the part are 8 terminations. It is designed with 8 pins. It is based on the TPS2419 component. Performance is delivered through 3V. For the purpose of running 260, this part's peak reflow temperature is utilized. It is necessary to run the supply current at 4.25mA for the part. It is a part from the Power Management Circuits family. This part contains 8 pins that are located on the surface. It is possible to use this chip with an input voltage that exceeds 16.5V volts. It is possible to use the chip if the input voltage is less than 800mV Volts. At 1.2mA, it uses quiescent current.
TPS2419PW Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
TPS2419PW Applications
There are a lot of Texas Instruments TPS2419PW Ideal Diode controller applications.
- Motor drives
- Electricity meters
- Industrial transport
- Alternator
- USB HUBs
- AC Rectifier
- Automotive battery protection
- ADAS domain controller
- Factory automation and control - PLC digital output modules
- Power supply reverse polarity protection
