TPS2456RHHT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-VFQFN Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Latched Fault, Thermal Limit, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, OR Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Additional Feature | THRESHOLD VOLTAGE IS 1.35 V |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 8.5V~15V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Depth | 6.1mm |
| Base Part Number | TPS2456 |
| Pin Count | 36 |
| Output Voltage | 23V |
| Operating Supply Voltage | 12V |
| Supply Voltage-Max (Vsup) | 15V |
| Supply Voltage-Min (Vsup) | 8.5V |
| Number of Channels | 2 |
| Nominal Supply Current | 3.1mA |
| Max Supply Current | 4mA |
| Adjustable Threshold | NO |
| Output Current-Max | 500A |
| Nominal Input Voltage | 12V |
| Internal Switch(s) | No |
| Programmable Features | Circuit Breaker, Current Limit, Fault Timeout, Slew Rate |
| Height | 1mm |
| Length | 6mm |
| Width | 6mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2456RHHT Overview
The 36-VFQFN Exposed Pad package contains it.In the current state, 2 channels are accessible.It's packaged in a Tape & Reel (TR) shape.There are a total of 36 terminations on it.This device has a terminal position of QUAD.In total, there are 36 pins on it.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 12V.According to Surface Mount, it has been set up.Hot-swappable device is classified as a Hot Swap Controller, OR Controller electrical component.For reliable performance, the temperature should be set to -40°C~85°C.The device has General Purpose applicationsAs you can see in Latched Fault, Thermal Limit, UVLO, it's featured.Hot-swappable device should work if you use a 8.5V~15VV power source.Hot-swappable device is included in the TPS2456 family of numbers.Hot-swappable device is necessary to use 36 pins in order to operate the device.A gadget like this is self-contained in Power Management Circuits.Hot-swappable device has Circuit Breaker, Current Limit, Fault Timeout, Slew Rate programmable features.As you can see, it is positioned in the direction of Surface Mount.For normal operation, the supply voltage (Vsup) should be kept above 8.5V in order to maintain a constant level of power.15V (maximum supply voltage) is set.Its maximum current requirement is 4mA.With the help of this device, THRESHOLD VOLTAGE IS 1.35 V can also be produced.A 23V output voltage allows for high efficiency.
TPS2456RHHT Features
The terminal position of 36
Features of Latched Fault, Thermal Limit, UVLO
Programmable features of Circuit Breaker, Current Limit, Fault Timeout, Slew Rate
Output voltage of 23V
TPS2456RHHT Applications
There are a lot of Texas Instruments TPS2456RHHT hot swap controllers applications.
- Microcontrollers
- Base station power distribution system
- Circuit breakers for high-side circuits
- Telecommunications
- Firewire
- Base station
- PC board hot swap insertion and removal
- Redundant Array of Disks (RAID)
- Board or blade insertion into live backplanes
- Networking
