TPS2459RHBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | I2C, Thermal Limit, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, OR Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | ATCA, MicroTCA™ |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~4V 8.5V~15V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Depth | 5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2459 |
| Pin Count | 32 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 4V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Current - Output (Max) | 165mA |
| Nominal Supply Current | 4mA |
| Max Supply Current | 4mA |
| Adjustable Threshold | YES |
| Current - Supply | 3.1mA |
| Internal Switch(s) | Both |
| Programmable Features | Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault, Slew Rate |
| Feature Pins | EN12, EN3, /FLT12, /FLT3, /PG12, /PG3, SET, SUM12, SUM3, VINT |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS2459RHBR Overview
The 32-VFQFN Exposed Pad package contains it.As of now, 2 channels are available.In the form of a Tape & Reel (TR), it is packaged.Total terminations are 32.In this case, the device is located at terminal QUAD.In total, there are 32 pins on it.High efficiency is possible at a voltage of 3.3V.The way it's set up is the way Surface Mount wants it.Electrical components classified as Hot Swap Controller, OR Controller are referred to as Hot Swap Controller, OR Controller components.Ensure reliable operation by setting the temperature to -40°C~85°C.Devices with ATCA, MicroTCA? applications are available.I2C, Thermal Limit, UVLO features it.Hot-swappable device should be able to work wHot-swappable deviceh a 3V~4V 8.5V~15VV power source.This number is a member of the TPS2459 family.Hot-swappable device is necessary to use 32 pins in order to operate the device.A gadget like this is self-contained in Power Management Circuits.There are Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault, Slew Rate programmable features on this device.The current supply of 3.1mA.Surface Mount directs its position.For normal operation, Vsup should be kept above 3V.Vsup (maximum supply voltage) is set to 4V.Device 165mAV has a maximum output.There is a maximum current requirement of 4mA for it to operate.
TPS2459RHBR Features
The terminal position of 32
Features of I2C, Thermal Limit, UVLO
Programmable features of Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault, Slew Rate
TPS2459RHBR Applications
There are a lot of Texas Instruments TPS2459RHBR hot swap controllers applications.
- Current monitor output
- PC board hot swap insertion and removal
- Storage network
- Disconnect faulty loads before supply voltage drops
- Short circuit protection
- Automatic restart after load failure
- Central office switching systems
- Comprehensive analog and digital capabilities
- High power circuit board
- Industrial
