banner_page

TPS24700DGK

Tube Active 1 Surface Mount Hot Swap Controllers Latched Fault, Thermal Limit 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 1 General Purpose Hot Swap Controller


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS24700DGK
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 391
  • Description: Tube Active 1 Surface Mount Hot Swap Controllers Latched Fault, Thermal Limit 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 1 General Purpose Hot Swap Controller (Kg)

Details

Tags

Parameters
Number of Pins 8
Weight 25.996513mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Feature Latched Fault, Thermal Limit
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Hot Swap Controller
Applications General Purpose
Subcategory Power Management Circuits
Max Power Dissipation 240mW
Voltage - Supply 2.5V~18V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 12V
Terminal Pitch 0.65mm
Depth 3.1mm
Base Part Number TPS24700
Pin Count 8
Output Voltage 25.8V
Supply Voltage-Min (Vsup) 2.5V
Number of Channels 1
Operating Supply Current 1mA
Max Supply Current 1.4mA
Adjustable Threshold YES
Output Current-Max 500A
Nominal Input Voltage 18V
Internal Switch(s) No
Programmable Features Current Limit, Fault Timeout, UVLO
Feature Pins EN, PGB, TIMER
Height 1.07mm
Length 3mm
Width 3mm
Thickness 970μm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

TPS24700DGK Overview


This is included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.At present, 1 channels are available.There is a Tube-shaped package for it.Hot-swappable device has a total of 8 terminations.There is a DUAL terminal position on the device.8 pins make up its total.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 12V.It's?set?up?in?the?way?of?Surface Mount.Electrical components classified as Hot Swap Controller are referred to as Hot Swap Controller components.Ensure reliable operation by setting the temperature to -40°C~85°C.Application General Purpose is available on the device.An article about it appears in Latched Fault, Thermal Limit.With a 2.5V~18VV power source, it should work.TPS24700 numbers belong to this family.This device uses 8 pins for operation.Power Management Circuits contains this gadget on its own.Among its programmable features are Current Limit, Fault Timeout, UVLO.Surface Mount directs its position.In order for a device to operate normally, the supply voltage (Vsup) must be higher than 2.5V.Supply current 1mA is operative.Hot Swap requires 1.4mA volts of current to operate.Hot Swap is possible to achieve high efficiency wHot Swaph a 25.8V output voltage.

TPS24700DGK Features


The terminal position of 8
Features of Latched Fault, Thermal Limit
Programmable features of Current Limit, Fault Timeout, UVLO
Output voltage of 25.8V

TPS24700DGK Applications


There are a lot of Texas Instruments TPS24700DGK hot swap controllers applications.

  • Modern analog communication
  • Electric vehicle
  • Industrial
  • Comprehensive analog and digital capabilities
  • Continuous monitoring of device temperature
  • Current limit and current foldback limit functions
  • Inrush current control
  • USB interface
  • CompactPCI
  • Current monitor output

Write a review

Note: HTML is not translated!
    Bad           Good