banner_page

TPS24700DGKR

Cut Tape (CT) Active 1 Surface Mount Hot Swap Controllers Latched Fault, Thermal Limit 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 1 General Purpose Hot Swap Controller


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS24700DGKR
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 205
  • Description: Cut Tape (CT) Active 1 Surface Mount Hot Swap Controllers Latched Fault, Thermal Limit 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 1 General Purpose Hot Swap Controller (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
JESD-609 Code e4
Feature Latched Fault, Thermal Limit
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Hot Swap Controller
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Applications General Purpose
Subcategory Power Management Circuits
Voltage - Supply 2.5V~18V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 12V
Terminal Pitch 0.65mm
Depth 3.1mm
Base Part Number TPS24700
Pin Count 8
Supply Voltage-Min (Vsup) 2.5V
Number of Channels 1
Nominal Supply Current 1mA
Power Dissipation 240mW
Max Supply Current 1.4mA
Adjustable Threshold YES
Output Current-Max 500A
Internal Switch(s) No
Programmable Features Current Limit, Fault Timeout, UVLO
Feature Pins EN, PGB, TIMER
Height 1.07mm
Length 3mm
Width 3mm
Thickness 970μm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS24700DGKR Overview


In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package you will find it.At the moment, there are 1 channels available.The package resembles a Cut Tape (CT).There are 8 terminations in total.Device DUAL is in the terminal position.A total of 8 pins are present on it.High efficiency is possible at a voltage of 12V.Surface Mount has set it up this way.Electric components of this type are classified as Hot Swap Controller.For reliable performance, the temperature should be set to -40°C~85°C.A General Purpose application is available for the device.The article is featured in Latched Fault, Thermal Limit.Hot-swappable device should work if you use a 2.5V~18VV power source.The number TPS24700 belongs to the TPS24700 family.8 pins are used to operate the system.The gadget in Power Management Circuits is self-contained.Hot-swappable device has Current Limit, Fault Timeout, UVLO programmable features.The position of the object is in the direction of Surface Mount.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 2.5V so that the device can function normally.During operation, it will require a maximum current of 1.4mA.

TPS24700DGKR Features


The terminal position of 8
Features of Latched Fault, Thermal Limit
Programmable features of Current Limit, Fault Timeout, UVLO

TPS24700DGKR Applications


There are a lot of Texas Instruments TPS24700DGKR hot swap controllers applications.

  • Data communication systems
  • Current limit and current foldback limit functions
  • Supply voltage monitoring
  • Industrial application
  • Storage network
  • Circuit power protectors
  • Circuit breakers for electronic circuits
  • Overcurrent protection
  • Network switches
  • Firewire

Write a review

Note: HTML is not translated!
    Bad           Good