TPS24701DGK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Auto Retry, Thermal Limit |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Depth | 3mm |
| Base Part Number | TPS24701 |
| Pin Count | 8 |
| Output Voltage | 25.8V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 1mA |
| Power Dissipation | 240mW |
| Max Supply Current | 1.4mA |
| Adjustable Threshold | YES |
| Output Current-Max | 500A |
| Nominal Input Voltage | 18V |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, UVLO |
| Feature Pins | EN, PGB, TIMER |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS24701DGK Overview
You get it with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.1 channels are currently available.The package looks like a Tube.There are a total of 8 terminations on it.Device position DUAL is its terminal position.In total, it has 8 pins.With a supply voltage of 12V, high efficiency is possible.Surface Mount has set it up this way.An electrical component classified as Hot Swap Controller belongs to this category.If you want reliable performance, you should set the temperature to -40°C~85°C.General Purpose applications are available on the device.A feature of Auto Retry, Thermal Limit describes it.Hot-swappable device should work if you use a 2.5V~18VV power source.In the TPS24701 family, it appears as a number.This device uses 8 pins for operation.Power Management Circuits contains this gadget all by itself.Current Limit, Fault Timeout, UVLO is its programmable feature.As you can see, it is positioned in the direction of Surface Mount.Normally, Vsup should remain above 2.5V.There is a maximum current requirement of 1.4mA for it to operate.25.8V output voltage enables high efficiency.
TPS24701DGK Features
The terminal position of 8
Features of Auto Retry, Thermal Limit
Programmable features of Current Limit, Fault Timeout, UVLO
Output voltage of 25.8V
TPS24701DGK Applications
There are a lot of Texas Instruments TPS24701DGK hot swap controllers applications.
- Server backplane system
- Industrial high-side switches
- Short circuit protection
- Servers
- Microcontrollers
- Avionics systems
- Load transient protection
- Disconnect faulty loads before supply voltage drops
- Current monitoring
- Temperature monitor output
