banner_page

TPS24701DGKR

Cut Tape (CT) Active 1 Surface Mount Hot Swap Controllers Auto Retry, Thermal Limit 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 1 General Purpose Hot Swap Controller


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS24701DGKR
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 854
  • Description: Cut Tape (CT) Active 1 Surface Mount Hot Swap Controllers Auto Retry, Thermal Limit 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 1 General Purpose Hot Swap Controller (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
JESD-609 Code e4
Feature Auto Retry, Thermal Limit
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Hot Swap Controller
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Applications General Purpose
Subcategory Power Management Circuits
Voltage - Supply 2.5V~18V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 12V
Terminal Pitch 0.65mm
Depth 3.1mm
Base Part Number TPS24701
Pin Count 8
Supply Voltage-Min (Vsup) 2.5V
Number of Channels 1
Nominal Supply Current 1mA
Power Dissipation 240mW
Max Supply Current 1.4mA
Adjustable Threshold YES
Output Current-Max 500A
Internal Switch(s) No
Programmable Features Current Limit, Fault Timeout, UVLO
Feature Pins EN, PGB, TIMER
Height 1.07mm
Length 3mm
Width 3mm
Thickness 970μm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS24701DGKR Overview


You can find it in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.At the moment, 1 channels are accessible.A Cut Tape (CT)-shaped package holds it.Hot-swappable device has a total of 8 terminations.The terminal position of the device is DUAL.A total of 8 pins are present on it.High efficiency can be achieved with a voltage supply of 12V.This is set up in the same way as Surface Mount.Electrical components classified as Hot Swap Controller are referred to as Hot Swap Controller components.For reliable operation, set the temperature to -40°C~85°C.Application General Purpose is available on the device.A feature of Auto Retry, Thermal Limit describes it.If the power source is 2.5V~18VV, it should work fine.The TPS24701 family includes it.Operating the device requires 8 pins.As far as Power Management Circuits is concerned, this gadget is self-contained.Current Limit, Fault Timeout, UVLO features are programmable.As you can see, it is positioned in the direction of Surface Mount.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 2.5V in order to maintain normal operation.There is a maximum current requirement of 1.4mA for it to operate.

TPS24701DGKR Features


The terminal position of 8
Features of Auto Retry, Thermal Limit
Programmable features of Current Limit, Fault Timeout, UVLO

TPS24701DGKR Applications


There are a lot of Texas Instruments TPS24701DGKR hot swap controllers applications.

  • Distributed power systems
  • Raid
  • Networking
  • Redundant negative voltage supplies
  • Remote access server
  • Safe board insertion and extraction
  • Thermal limitation
  • Reverse current protection
  • Load transient protection
  • Servers

Write a review

Note: HTML is not translated!
    Bad           Good