banner_page

TPS24712DGS

Bulk Active 1 Surface Mount Hot Swap Controllers Latched Fault, Thermal Limit 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) 1 General Purpose Hot Swap Controller


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS24712DGS
  • Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
  • Datasheet: -
  • Stock: 192
  • Description: Bulk Active 1 Surface Mount Hot Swap Controllers Latched Fault, Thermal Limit 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) 1 General Purpose Hot Swap Controller (Kg)

Details

Tags

Parameters
JESD-609 Code e4
Feature Latched Fault, Thermal Limit
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 10
ECCN Code EAR99
Type Hot Swap Controller
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Applications General Purpose
Subcategory Power Management Circuits
Voltage - Supply 2.5V~18V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 12V
Terminal Pitch 0.5mm
Depth 3.1mm
Base Part Number TPS24712
Pin Count 10
Supply Voltage-Min (Vsup) 2.5V
Number of Channels 1
Nominal Supply Current 1mA
Power Dissipation 240mW
Max Supply Current 1.4mA
Adjustable Threshold YES
Output Current-Max 500A
Internal Switch(s) No
Programmable Features Current Limit, Fault Timeout, UVLO
Feature Pins EN, FLT, PG, PROG, TIMER
Height 1.07mm
Length 3mm
Width 3mm
Thickness 1.02mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins 10
Operating Temperature -40°C~85°C
Packaging Bulk

TPS24712DGS Overview


This is included in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.Currently, there are 1 channels accessible.Bulk-shaped packaging is used.In total, it has 10 terminations.Device DUAL is located at the terminal position.Hot-swappable device has a total of 10 pins on Hot-swappable device.The supply voltage 12V is necessary for high efficiency.This is set up in the same way as Surface Mount.The electrical component in question falls into the classification Hot Swap Controller.To ensure reliable operation, set the temperature to -40°C~85°C.The device has General Purpose applicationsThe article is featured in Latched Fault, Thermal Limit.If the power source is 2.5V~18VV, it should work fine.TPS24712 is a family of numbers.In order to operate, 10 pins are used.As far as Power Management Circuits is concerned, this gadget is self-contained.Current Limit, Fault Timeout, UVLO is the number of features it can be programmed with.Surface Mount directs its position.Normally, Vsup should remain above 2.5V.Hot Swap requires a maximum current of 1.4mA to operate.

TPS24712DGS Features


The terminal position of 10
Features of Latched Fault, Thermal Limit
Programmable features of Current Limit, Fault Timeout, UVLO

TPS24712DGS Applications


There are a lot of Texas Instruments TPS24712DGS hot swap controllers applications.

  • Reverse current protection
  • Power monitoring
  • Current limit and current foldback limit functions
  • Solid state circuit breakers
  • Remote access server
  • Firewire
  • Continuous monitoring of device temperature
  • Overcurrent protection
  • Network switches
  • Active current limit

Write a review

Note: HTML is not translated!
    Bad           Good