TPS2480PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | I2C, Latched Fault UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, Monitor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 9V~80V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.65mm |
| Depth | 4.5mm |
| Base Part Number | TPS2480 |
| Pin Count | 20 |
| Output Voltage | 100V |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 9/80V |
| Supply Voltage-Min (Vsup) | 9V |
| Number of Channels | 1 |
| Max Supply Current | 1mA |
| Adjustable Threshold | YES |
| Output Current-Max | 500A |
| Nominal Input Voltage | 20V |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout |
| Feature Pins | EN, PG, PROG, TIMER |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2480PW Overview
The 20-TSSOP (0.173, 4.40mm Width) package includes it.Hot-swappable device is currently possible to access 1 channels.It's packaged in a Tube shape.Hot-swappable device has a total of 20 terminations.There is a DUAL terminal position on the device.Hot-swappable device has a total of 20 pins on Hot-swappable device.High efficiency can be achieved when the supply voltage is 48V.As Surface Mount would say, it's set up like that.In electrical components, Hot Swap Controller, Monitor is the classification.Hot-swappable device is recommended that the temperature is set to -40°C~125°C in order to ensure reliable performance.The device has General Purpose applicationsAs you can see in I2C, Latched Fault UVLO, it's featured.With a 9V~80VV power source, it should work.Numbers in the TPS2480 family include it.During operation, 20 pins are used.As far as Power Management Circuits is concerned, this gadget is self-contained.There are Current Limit, Fault Timeout features that can be programmed.The position of the object is in the direction of Surface Mount.Normally, Vsup should remain above 9V.There is a value of 80V set for Vsup (maximum supply voltage).Part 9/80V uses a power supply that has a voltage.Its maximum current requirement is 1mA.With a 100V output voltage, high efficiency is possible.
TPS2480PW Features
The terminal position of 20
Features of I2C, Latched Fault UVLO
Programmable features of Current Limit, Fault Timeout
Output voltage of 100V
TPS2480PW Applications
There are a lot of Texas Instruments TPS2480PW hot swap controllers applications.
- Limitting the inrush current
- High power circuit board
- CompactPCI
- Redundant negative voltage supplies
- Comprehensive analog and digital capabilities
- Avionics systems
- USB interface
- Datacom
- Current limit and current foldback limit functions
- Firewire
