TPS2500DRCR
| Parameters | |
|---|---|
| Current - Output (Max) | 1.4A |
| Output Configuration | High Side or Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 5.25V |
| Control Technique | PULSE WIDTH MODULATION |
| Bandwidth | 1MHz |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 1.8V~5.25V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Boost Converter, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PFM TECHNIQUE ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2500 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Voltage | 5.1V |
| Output Type | N/P-Channel |
| Input Voltage-Nom | 3V |
| Interface | Logic |
| Analog IC - Other Type | SWITCHING REGULATOR |
TPS2500DRCR Overview
Tape & Reel (TR) is how it's packaged.In the 10-VFDFN Exposed Pad package, it is included.The lighting driver is mounted in the Surface Mount position.The switch type is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.There is a default setting of 2 for output.Operation is based on Not Required supply voltage.It produces a maximum output voltage of N/P-Channel volts at its maximum output.Boost Converter, Status Flag features are available on the lighting driver.I believe it belongs to the TPS2500 family.A total of 10 terminations have been found in it.10 pins are used for operation.There are 1 functions of the LED driver.From the lighting driver, there is a maximum output of 1.4AV.As a result, it has a total of 10 pins.The LED driver is packaged in an econtainer with a capacity of Switching Regulator or Controllers.In this case, the analog IC is SWITCHING REGULATOR.There is a maximum input voltage of 5.25V volts.A voltage of 1.8V volts is the minimum input voltage.With this LED driver, PFM TECHNIQUE ALSO POSSIBLE can also be produced.
TPS2500DRCR Features
Additional features like PFM TECHNIQUE ALSO POSSIBLE
TPS2500DRCR Applications
There are a lot of Texas Instruments TPS2500DRCR Power Switches ICs applications.
- USB3.1 Power Delivery
- Wireless Headsets
- HDD, SSD
- Portable GPS Device
- Wearable Devices
- Portable/Handheld Devices
- Set-top-box
- Hot Swap
- Handheld Devices
- PDAs
