TPS2500DRCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Boost Converter, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 185mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PFM TECHNIQUE ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 2.403W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2500 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Voltage | 5.1V |
| Output Type | N/P-Channel |
| Input Voltage-Nom | 3V |
| Interface | Logic |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Current - Output (Max) | 1.4A |
| Output Configuration | High Side or Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 85 ns |
| Switch Type | USB Switch |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 5.25V |
| Control Technique | PULSE WIDTH MODULATION |
| Bandwidth | 1MHz |
| Nominal Input Voltage | 5.25V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 1.8V~5.25V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2500DRCT Overview
It is packaged in the form of a Tape & Reel (TR).It is included in the package 10-VFDFN Exposed Pad.The lighting driver is mounted in the Surface Mount position.There is a switch type of USB Switch.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.The lighting driver has a total of 2 outputs that are available for use.To operate, it needs a supply voltage of Not Required.The maximum output voltage of this LED driver is N/P-Channel volts.There are Boost Converter, Status Flag features available on the LED driving board.The TPS2500 family consists of this type.It consists of 10 terminations in total.The operation is carried out using the 10 pins.It is important to note that the LED driving board has 1 functions.1.4AV is the maximum output of the LED driver.A total of 10 pins are included in this LED driver.It has 185mOhm resistance.It is self-contained in an econtainer with a capacity of Switching Regulator or Controllers.In this case, the analog IC in this gadget is SWITCHING REGULATOR.There is a maximum input voltage of 5.25V volts.Input voltage must be at least 1.8V volts.With this LED driver, PFM TECHNIQUE ALSO POSSIBLE can also be produced.
TPS2500DRCT Features
Resistance of 185mOhm
Additional features like PFM TECHNIQUE ALSO POSSIBLE
TPS2500DRCT Applications
There are a lot of Texas Instruments TPS2500DRCT Power Switches ICs applications.
- Hot-Swap Systems
- Set-top-box
- HDD and SSD
- Telecom and Network Systems
- Wireless Headsets
- Mobile Communication Devices
- Low Voltage I/O System Power
- PDAs
- Hot Swap
- Portable GPS Device
