TPS2501DRCR
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PFM TECHNIQUE ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2501 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Voltage | 5.1V |
| Output Type | N/P-Channel |
| Max Output Current | 1.4A |
| Input Voltage-Nom | 3V |
| Interface | Logic |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 13μA |
| Output Configuration | High Side or Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 5.25V |
| Control Technique | PULSE WIDTH MODULATION |
| Bandwidth | 1MHz |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 1.8V~5.25V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Boost Converter, Status Flag |
TPS2501DRCR Description
In order to meet USB 5-V power requirements from a 1.8-V to 5.25-V input supply, the TPS2501DRCR offers an integrated solution. Hi-Speed USB compatible power output, output switch enable, current limit, and overcurrent fault reporting are some of the features.
TPS2501DRCR Features
Accurate 1.4-A Setting with 20% Current Limit
Up to two standard USB ports are powered.
5.1-V Auxiliary Output
Short Overcurrent Response Time, Typically 5 ps
TPS2501DRCR Applications
Applications for Portability Using a Single Li+ Cell
Lack of Native 5-V Supplies for USB Hosts
