Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
10-VFDFN Exposed Pad |
Surface Mount |
YES |
Number of Pins |
10 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Boost Converter, Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Resistance |
120mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
PFM TECHNIQUE ALSO POSSIBLE |
Subcategory |
Switching Regulator or Controllers |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.5mm |
Base Part Number |
TPS2501 |
Pin Count |
10 |
Number of Outputs |
2 |
Output Voltage |
5.1V |
Output Type |
N/P-Channel |
Max Output Current |
1.4A |
Input Voltage-Nom |
3V |
Interface |
Logic |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Configuration |
High Side or Low Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
5 ms |
Switch Type |
USB Switch |
Min Input Voltage |
1.8V |
Control Mode |
CURRENT-MODE |
Max Input Voltage |
5.25V |
Control Technique |
PULSE WIDTH MODULATION |
Bandwidth |
1MHz |
Turn-Off Delay Time |
10 ms |
Ratio - Input:Output |
1:2 |
Voltage - Load |
1.8V~5.25V |
Fault Protection |
Current Limiting (Adjustable), Over Temperature, UVLO |
Rds On (Typ) |
80m Ω |
Height |
1mm |
Length |
3mm |
Width |
3mm |
Thickness |
900μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2501DRCT Overview
Tape & Reel (TR) is the way it's packaged.It is included in the package 10-VFDFN Exposed Pad.In this case, the LED driving board is mounted as Surface Mount.It owns USB Switch switch type.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.It is possible to use 2 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.It has a maximum output voltage of N/P-Channel volts.Currently, the LED driving board is equipped with Boost Converter, Status Flag features.I believe it belongs to the TPS2501 family.It contains 10 terminations.The 10 pins are used for the operation of the system.As far as functions are concerned, the lighting driver has 1.The maximum output current must drop to 1.4A to meet the operation criteria.10 pins are equipped with it.Currently, the LED driving board has 120mOhm resistance.The LED driver is packaged in an econtainer with a capacity of Switching Regulator or Controllers.It uses an analog IC, which is SWITCHING REGULATOR.The maximum input voltage of the LED driver is 5.25V volts.It requires 1.8V volts as the minimum input voltage.This LED driver can also produce PFM TECHNIQUE ALSO POSSIBLE.
TPS2501DRCT Features
Resistance of 120mOhm
Additional features like PFM TECHNIQUE ALSO POSSIBLE
TPS2501DRCT Applications
There are a lot of Texas Instruments TPS2501DRCT Power Switches ICs applications.
- PDAs
- Portable GPS Device
- HDD and SSD
- Various applications equipped with buttons
- Storage Drives
- USB Protection
- Wearable Devices
- Portable Music Players
- Set-top-box
- Portable Video Game Players