TPS2505B1RGWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 22 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Boost Converter, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO HAS A CONTROL TECHNIQUE OF PFM |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPS2505 |
| Pin Count | 20 |
| Number of Outputs | 3 |
| Output Voltage | 3.3V |
| Output Type | N/P-Channel |
| Input Voltage-Nom | 3.3V |
| Interface | Logic |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Current - Output (Max) | 1.1A |
| Output Configuration | High Side or Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 5.25V |
| Control Technique | PULSE WIDTH MODULATION |
| Bandwidth | 1MHz |
| Ratio - Input:Output | 1:3 |
| Voltage - Load | 1.8V~5.25V |
| Switching Frequency-Max | 1150kHz |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω (Max) |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2505B1RGWR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It's included in the 20-VQFN Exposed Pad package.The lighting driver is mounted in the Surface Mount position.There is a USB Switch switch type associated with it.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.The LED driver has a total of 3 outputs.A voltage of Not Required is used to power it.A maximum output voltage of N/P-Channel volts can be obtained with this LED driver.There are Boost Converter, Status Flag features available on the LED driving board.I believe it belongs to the TPS2505 family.In total, there are 20 terminations.The 20 pins are used for the operation of the system.It is important to note that the LED driving board has 1 functions.The maximum output of the LED driving board is 1.1AV.20 pins are connected to it in total.The LED driver is self-contained in an econtainer with Switching Regulator or Controllers capacity.In this case, the analog IC is SWITCHING REGULATOR.Voltage input is limited to 5.25V volts.As far as input voltage goes, it has a minimum of 1.8V volts.The LED driver can also be used to produce ALSO HAS A CONTROL TECHNIQUE OF PFM.
TPS2505B1RGWR Features
Additional features like ALSO HAS A CONTROL TECHNIQUE OF PFM
TPS2505B1RGWR Applications
There are a lot of Texas Instruments TPS2505B1RGWR Power Switches ICs applications.
- Storage Drives
- Telecom and Network Systems
- Hot Swaps
- USB Ports/Hubs
- Portable GPS Device
- Hot Swap
- USB Protection
- Portable Video Game Players
- Wireless Headsets
- PDAs
